QP132三级参考手册.pdf.pdf - 第48页
Notes: Chapter 2 2.3 T raining Evaluation Edition 1.0 2-8 QP-132 Level 3 T utorial
2.3 Training Evaluation
Circle the most appropriate answer from the list below.
(1) Which is the correct value of PO-axis coupling torque?
a. 1.35 Nm
b. 0.15 kgf/m
c. 1.45 Nm
(2) To measure the PCB Pickup Position PO FWD, adjust the pallet jaw and
manipulator jaw to:
a. align evenly.
b. have 1.4 mm distance.
c. have contact.
(3) The distance between PCB Arrival and Reduction Sensors is:
a. 61 mm.
b. 70 mm.
c. 50 mm.
(4) Which is the correct order of measuring PCB Pickup Position PO FWD
and PCB Pickup Position PO (Rotate-loading)?
a. At the same time
b. PCB Pickup Position PO (Rotate-loading) first
c. PCB Pickup Position PO FWD first
(5) PO-axis zero set sensor is set at:
a. 400 pulses.
b. 140 pulses.
c. 800 pusles.
Chapter 2 2.3 Training Evaluation
Edition 1.0 2-7 QP-132 Level 3 Tutorial
Notes:
Chapter 2 2.3 Training Evaluation
Edition 1.0 2-8 QP-132 Level 3 Tutorial
Chapter 3
SS