QP132三级参考手册.pdf.pdf - 第55页
Notes: Chapter 3 3.3 T raining Evaluation Edition 1.0 3-6 QP-132 Level 3 T utorial
3.3 Training Evaluation
Circle the most appropriate answer from the list below.
(1) To measure SSO, which jig and tools are required?
a. SSO jig and feeler gauge
b. SSO jig and dial gauge
c. All of the above.
(2) After replacing the SS0 motor, zero set:
a. without the timing belt.
b. with the timing belt attached.
c. with the timing belt attached but no tension applied.
(3) SS0 is the position where:
a. the SS motor count is 0.
b. the pallet is loaded.
c. Both a and b above.
(4) SS-axis timing belt tension is:
a. 73 ± 10 Hz
b. 75 ± 5 Hz
c. 75 ± 10 Hz
(5) SS stands for:
a. Step Style
b. Slight Step
c. Step Slide
Chapter 3 3.3 Training Evaluation
Edition 1.0 3-5 QP-132 Level 3 Tutorial
Notes:
Chapter 3 3.3 Training Evaluation
Edition 1.0 3-6 QP-132 Level 3 Tutorial
Chapter 4
PM