QP132三级参考手册.pdf.pdf - 第71页
4.6 T raining Evaluation Circle the most appropriate answer from the list below. (1) Which is the correct order for installing the Z-motor? a. Zero set, attach to the machine. b. Attach to the machine and zero set. c. At…
Notes:
Chapter 4 4.5 Measuring PM Proper Data and Adjustment
Edition 1.1 4-14 QP-132 Level 3 Tutorial
4.6 Training Evaluation
Circle the most appropriate answer from the list below.
(1) Which is the correct order for installing the Z-motor?
a. Zero set, attach to the machine.
b. Attach to the machine and zero set.
c. Attach to the machine and no zero set is required.
(2) Program Origin is the value of:
a. zero coordinates of the sequence.
b. nozzle center position.
c. camera center position.
(3) Which nozzle holder is used to measure Placement Height Z?
a. A
b. A and D
c. A, B, C and D
(4) To install X or Y-motor, boot up the machine in:
a. mechanical check mode.
b. normal mode.
c. QP132 special mode.
(5) Which method should be used to enable the module?
a. Proper data setting
b. Command
c. Both a and b.
Chapter 4 4.6 Training Evaluation
Edition 1.0 4-15 QP-132 Level 3 Tutorial
Notes:
Chapter 4 4.6 Training Evaluation
Edition 1.0 4-16 QP-132 Level 3 Tutorial