QP132三级参考手册.pdf.pdf - 第78页
5.3 T raining Evaluation Circle the most appropriate answer from the list below. (1) To focus mark camera: a. lens should be adjusted. b. camera height should be adjusted. c. Both a and b. (2) If the resolution values ar…
Adjust camera focus by adjusting bolt.
Center pin
Fixing bolt
Eccentric bolt
1 mm
Mark camera calibration jig
M/C from IN side ←
8-inch pallet
SS0 position
SS index rail
Focus adj.
bolt
Low/raise the camera
to adjust focus.
After that, calibrate.
¥
¥
QP132T5002
Chapter 5
5.2 Measuring Mark Camera Proper Data and Adjustment
Edition 1.1 5-4 QP-132 Level 3 Tutorial
5.3 Training Evaluation
Circle the most appropriate answer from the list below.
(1) To focus mark camera:
a. lens should be adjusted.
b. camera height should be adjusted.
c. Both a and b.
(2) If the resolution values are out of range:
a. re-adjust the focus.
b. re-adjust the gain.
c. replace the camera.
(3) Delta Q for mark camera is within:
a. ± 0.50 deg.
b. ± 0.050 deg.
c ± 0.0050 deg.
(4) Gain dip switch is set to:
a. A.
b. F.
c. M.
(5) After adjusting mark camera focus:
a. the fixing bolt needs to be tightened.
b. the center pin needs to be tightened.
c. Both a and b.
Chapter 5 5.3 Training Evaluation
Edition 1.0 5-5 QP-132 Level 3 Tutorial
Notes:
Chapter 5 5.3 Training Evaluation
Edition 1.0 5-6 QP-132 Level 3 Tutorial