00193802-01 - 第145页
User Manual SIPLAC E CF 6 Component han dling Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders 145 6.2.6 12 mm S feed er for cap acitor s based on powdere d met al, model E Fig. 6.2 - 6 12…
6 Component handling User Manual SIPLACE CF
6.2 Technical data for the feeders Software version SR.101.xx 06/2003 US Edition
144
6.2.5 12 mm S feeder for capacitors based on powdered metal, model C/D
Fig. 6.2 - 5 12 mm S feeder for capacitors based on powdered metal, model C/D
6
Part no. 00141118-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Maximum tape height 3.6 mm
Transport distance (variable) 4mm, 8mm, 12mm, 16mm
PLEASE NOTE 6
Using this feeder type you can adjust the height of the tape support at the pick-up position. 6
6
WARNING 6
Use only feeders, labeled as shown above, when feed-
ing capacitors based on metal-powder (e.g. tantalum). 6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
User Manual SIPLACE CF 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders
145
6.2.6 12 mm S feeder for capacitors based on powdered metal, model E
Fig. 6.2 - 6 12 mm S feeder for capacitors based on powdered metal, model E
6
Part no. 00141117-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Maximum tape height 3.6 mm
Transport distance (variable) 4mm, 8mm, 12mm, 16mm
6
WARNING 6
Use only feeders, labeled as shown above, when feed-
ing capacitors based on metal-powder (e.g. tantalum).6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
6 Component handling User Manual SIPLACE CF
6.2 Technical data for the feeders Software version SR.101.xx 06/2003 US Edition
146
6.2.7 24/32 mm S feeder
Fig. 6.2 - 7 24/32 mm S feeder
6
Part no. 00141093-xx
42.4 mm wide
Tracks per feeder 1
Assigned locations 1.5
Maximum number of feeders 2 x 13
Stock of components for 7" reels approx. 2000
Transport distance (variable) 4 to 40 mm, (in 4 mm increments)