00193802-01 - 第159页
User Manual SIPLAC E CF 6 Component han dling Software version SR.101.xx 06/2003 US Edition 6.4 Component trolley 159 6.4.4 Support for the middle tape reel for 3x 8 mm feeders T ype 3x 8 mm S feeders transport com ponen…
6 Component handling User Manual SIPLACE CF
6.4 Component trolley Software version SR.101.xx 06/2003 US Edition
158
Fig. 6.4 - 4 Connecting the compressed air supply for bulk case feeders
6
(1) Coupling connector for compressed air
(2) Coupling socket with supply hose
(3) Compressed air supply distributor for bulk case feeders
User Manual SIPLACE CF 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.4 Component trolley
159
6.4.4 Support for the middle tape reel for 3x 8 mm feeders
Type 3x 8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels for the two outer tracks are located between the dividing plates in the tape container. The
middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1) and
– 1 tape reel holder (item 2) for every two feeders
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
Fig. 6.4 - 5 Support for the middle tape reel for 3x 8 mm feeders
6
(1) Adapter plate
(2) Tape reel holder
6 Component handling User Manual SIPLACE CF
6.5 Used tape cutter Software version SR.101.xx 06/2003 US Edition
160
6.5 Used tape cutter
6.5.1 General
The placement system has a used tape cutter at each of the two component trolley locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component trolley.
Æ Empty the waste tape container every day.
Fig. 6.5 - 1 Used tape cutter
6
(1) Stationary cutting blade
(2) Retainer
(3) Moving cutting blade
(4) Electronic control unit
(5) Short stroke cylinder