00193802-01 - 第162页

6 Component handling User Manual S IPLACE CF 6.5 Used tape c utter Software version SR.101.xx 06/2003 US Edition 162 PLEAS E NOTE 6 On SIPLA CE aut omatic pl acement sy stems, on ly use t he tape feed ers speci fied for …

User Manual SIPLACE CF 6 Component handling

Software version SR.101.xx 06/2003 US Edition 6.5 Used tape cutter

161

6.5.2 Inserting the tape into the used tape cutter

Fig. 6.5 - 2 Inserting the tape into the used tape cutter

: 6

(1) Used tape channel

(2) Used tape

(3) To used tape cutter

6 Component handling User Manual SIPLACE CF

6.5 Used tape cutter Software version SR.101.xx 06/2003 US Edition

162

PLEASE NOTE 6

On SIPLACE automatic placement systems, only use the tape feeders specified for these ma-

chines. The used tape channel which removes the used tape is located upstream of the feeders.6

Æ Insert the tape into the feeder as described in the corresponding section.

Æ Guide the used tape into the used tape channel of the cutter as described in Fig. 6.5 - 2.

The used tape guide channels are located upstream of the feeders. They are positioned directly

above the used tape cutters.

The tape is automatically guided through the used tape guide channel into the used tape cutter

below. There, the tape is shredded by the pneumatically-actuated cutting blade. The waste tape

then passes via the waste tape chute into the waste container of the component trolley.

Fig. 6.5 - 3 Pull-out waste tape container in the component trolley

(1) Component trolley

(2) Pull-out waste tape container

User Manual SIPLACE CF 6 Component handling

Software version SR.101.xx 06/2003 US Edition 6.6 Waffle-pack changer

163

6.6 Waffle-pack changer

6.6.1 Overview

Fig. 6.6 - 1 Waffle-pack changer on the SIPLACE CF

(1) Waffle-pack changer at location 1

(2) SIPLACE CF