00195094-0202-MM-D3_EN - 第36页
7 Monthly maintenance jobs SIPLACE D3 08/2008 US Edition 36 7
SIPLACE D3 7 Monthly maintenance jobs
08/2008 US Edition
35
Clean the X/Y scales 7
7
Always use soft cloths and minimal pressure to clean the scale rods. 7
7
a Clean the incremental scales of the X and Y axes using a lint-free cloth moistened with ethyl
alcohol.
7
Dirty scale rods cause counting errors on the X and Y axes, and thus result in machine stop-
pages. 7
7
7
7
7 Monthly maintenance jobs SIPLACE D3
08/2008 US Edition
36
7
SIPLACE D3 7 Monthly maintenance jobs
08/2008 US Edition
37
Clean the IC camera and FC camera 7
There is a risk of cutting the fingers alon
g the edges of the mirror. 7
Wear laboratory gloves to protect your hands and avoid touching the edges. 7
7
The laboratory gloves are also essential for effective cleaning (fingerprints). 7
7
a Carefully lift up the top part of the IC camera.
s Clean the sloping glass disk using a lens cloth.
7
: Insert the top part of the IC camera once more.
When you insert the top part of the IC ca
mera, make sure that it lies flat against the bottom part
and does not move.
7
d Remove the top part of the FC camera in the same way.
f Clean the sloping glass disk using a lens cloth.
7
: Insert the top part again.
7
Clean the coplanarity module (if present) 7
: Clean the lenses of the coplanarity mo
dule with a lens cloth.
7
7
: Switch the placement machine on at the main switch.
: With the nozzle changer:
Pick up
all the nozzles from the nozzle changer.
: Dock the com
ponent trolley into the machine.