00195094-0202-MM-D3_EN - 第56页

9 4-monthly maintenance jobs SIPLACE D3 08/2008 US Edition 56 9

SIPLACE D3 9 4-monthly maintenance jobs

08/2008 US Edition

Distributor (back part of head) 9

a Carefully remove the distributor toge

ther with the two O-rings.

s Carefully remove the two O-rings.

: Clean them and grease them very sparingly with UNISILKON L250L.

: Check the distr

butor for damage.

Replace the distributor if it is damaged (see

servicing instructions).

: Wipe the distributor using a lint-free cloth moistened with ethyl alcohol.

The front part of the distributor (the side without the ball catch) may also be softened in ethyl al-

cohol. 9

: Blow through with compressed air.

d Check that the ball catch moves easily.

Replace the entire distributor if it does not move easily

f Place the clean distributor an

d the lightly greased O-rings on a clean surface.

9 4-monthly maintenance jobs SIPLACE D3

08/2008 US Edition

SIPLACE D3 9 4-monthly maintenance jobs

08/2008 US Edition

Star brake 9

: Check the sta

r brake for damage and to ensure that it is working correctly.

a Wipe the star brake using a dry, lint-free cloth. Make sure that you remove all grease residues.

: Fill each of the three small holes

in the star brake with ISOFLEX TOPAS NCA 52.

s Remove excess grease with a lint-free cloth.

: Apply a thin film of grease to the surface of the star brake.

Distributor seat 9

d Clean the distributor seat with a cottonwool bud moistened with ethyl alcohol.

Make sure that you do not push dirt into the vacuum opening with the cottonwool bud. 9