00195094-0202-MM-D3_EN - 第77页
SIPLACE D3 10 Annual maintenance work 08/2008 US Edition 77 Check the cooling air hoses 10 a Loosen the screw s on the cover plate ab ove the m agnetic rail, in front of the cable and hose carrier . : Pull the cover p la…
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
76
10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
77
Check the cooling air hoses 10
a Loosen the screws on the cover plate above the magnetic rail, in front of the cable
and hose
carrier.
: Pull the cover p
lates out of the slots and remove them.
10
10
s Check the cooling air hoses for damage, particularly in the vicinity of the cooling hose fixings
in the trailing chain.
Replace them if they are damaged (see
Service Manual).
10
10
If the cooling air hoses are defective: 10
– the Y motor can overheat and switch off
– guide carriages and guides may be damaged.
10
10
: Fit the cover plates.
10
: Repeat these tasks on both sides or gantries of the machines on the placement line.
10
10
10
10
10
10
10
10
10
10
10
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
78
10.1 Maintain the TwinHead
10