00195094-0202-MM-D3_EN - 第80页
10 Annual maintenance work SIPLACE D3 08/2008 US Edition 80 10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
79
10
To maintain the TwinHead, you will need: 10
– Set of hexagon socket spanners
– Lint-free cloths
– Ethyl alcohol
– Compressed air
– ESD wriststrap.
10
10
Dismantle the TwinHead 10
: Stop the placement process and place the TwinHead nozzles on one side.
: Dock out the component trolley
fr
om the placement machine.
: Switch the p
lacement machine off at the main switch.
10
Rebuilding is easiest if done from locations 2 and 4. 10
10
10
10
Wear an ESD wrist strap for the whole time you are working on the placement head and the ser-
vos. 10
10
a Unplug the exhaust hoses.
10
s Place the hoses and the blanking plug on one side.
10
d Release the strain relief clip (press the knob).
10
10
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
80
10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
81
a Unplug the four flat ribbon cables from the TwinHead.
10
s Unscrew four screws on each TwinHead module and remove both modules.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10