00195094-0202-MM-D3_EN - 第88页
11 Maintain the sleeves SIPLACE D3 08/2008 US Edition 88 1 1 Maint ain the sleeves 11
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
87
Mount the TwinHead 10
10
a Start (for ease of accessing the screws) by fitting the inner module (module 1) of the TwinHead
with four screws. Make sure that the screws are of the right length.
10
: Before attaching the outer module (module 2) to the head, insert the screws into the holes be-
tween the modules.
: Screw the oute
r module on in the same way as the inner one.
s Plug these hoses on and the blanking plug in.
d Connect up the exhaust hoses.
10
: Calibrate the TwinHead.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11 Maintain the sleeves SIPLACE D3
08/2008 US Edition
88
11 Maintain the sleeves
11
SIPLACE D3 11 Maintain the sleeves
08/2008 US Edition
89
11
You will need the following tools and consumables for maintaining the sleeves: 11
– Laboratory gloves
– Ethyl alcohol
– Lint-free cloths
– Cottonwool buds
– Microtips (cottonwool buds)
– Drill bit 1.1 mm
– Drill bit 1.4 mm
– Fin Grease spray grease
– Suction plate
SIPLACE sleeves maintenance:
6-segment C&P head (item no.: 00375674-01)
12-segment C&P head (item no.: 00375681-01). 11
11
a Check the foil for damage.
If the foil is damaged, send the sleeve to the SIPLACE Sleeve Maintenance.
11
s Spray a little Teflon grease into a suitable container.
Moisten the cottonwool bud with Teflon grease.
Do not spray the Teflon grease directly from the spray ca
n to avoid over-application and thus
damaging the placement head.
11
To clean, only use ethyl alcohol. Do not use white spirit, otherwise streaks will form on the incre-
mental disk. 11
Do not use silicone-soluble cleaning agents. 11
11
d Run the dampened cottonwool bud along the back of the anti-rotation element.
11
f Check that the switching ring moves easily in the sleeve.
The unit that is moved must not catch or run jerkily.
If this is not the case after greasing, send the sleeve
to SIPLACE Sleeve Maintenance.
11
11