80S-2080F480F4-680F5 User’s Manual - 第12页
0 Introduction SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 0.1 General Edition 03/98 from Software Vers ion SR.404.xx 0 - 8 0.1.6 On the SIPLACE 80F 5 automatic placeme nt systems The SI PLACE 80F 5 automatic placem ent syst…
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 0 Introduction
Edition 03/98 from Software Version SR.404.xx 0.1 General
0 - 7
0.1.3 The SIPLACE 80S-20 Machine
The SIPLACE 80S-20 placement machine is a modular high-performance placement system with double gan-
try axes and two 12-nozzle revolver heads on one station. While one placement head is taking components
from the feed modules, the other placement head is mounting the components it had just picked up.
The quality of placement is assured by means of PCB position recognition and component centering via the
vision system.
It is possible to link input and output units, screen printing units and solder ovens.
The SIPLACE 80S-20 is supplied with the necessary data by a line computer running under the UNIX operat-
ing system. It is also possible to connect up with a higher-level data processing system via this line computer.
0.1.4 The SIPLACE 80F
4
Machine
The SIPLACE 80F
4
placement machine is a modular high-performance placement system with one 12-nozzle
revolver head and one IC head on a single gantry. The revolver head components are mounted first and then
the IC head components.
The quality of placement is assured by PCB position recognition and component centering via the vision sys-
tem.
Optionally a coplanarity laser module or a flip-chip vision module can be installed.
A wafflepack changer may be used to supply the components.
0.1.5 On the SIPLACE 80F
4
-6 automatic placement systems
The SIPLACE 80F
4
-6 automatic placement system is a modular, high performance placement system with a
6-nozzle revolver head and an IC placement head on a gantry. The components on the revolver head are
inserted first, followed by the components on the IC head. The 6-nozzle revolver head can process the entire
range of components, from the 0603 chip through to the QFP 208, if type 7 or type 8 nozzles are used for this
purpose (see chapter 17).
The placement quality is ensured by the PCB position detection system and the components are centered
using the vision system.
Optionally a coplanarity laser module or a flip-chip vision module can be installed.
A wafflepack changer may be used to supply the components.
On-line help 8
New coplanarity laser module 1; 5; 9
New nozzles, nozzle contour diagrams 17
Revised functions Affected Chapter / Section
0 Introduction SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
0.1 General Edition 03/98 from Software Version SR.404.xx
0 - 8
0.1.6 On the SIPLACE 80F
5
automatic placement systems
The SIPLACE 80F
5
automatic placement system is a modular, high performance placement system with a 6-
nozzle revolver head and an IC placement head on a gantry. The components on the revolver head are
inserted first, followed by the components on the IC head. The 6-nozzle revolver head can process the entire
range of components, from the 0603 chip through to the QFP 208, if type 7 or type 8 nozzles are used for this
purpose (see chapter 17). The new optional component vision system (DCA option) can be used to insert flip-
chip components and bare dies up to 13 x 13 mm in size, in addition to standard components.
The placement quality is ensured by the PCB position detection system and the components are centered
using the vision system. The placement system is also now equipped with a new, pneumatically-controlled
tape cutter.
A coplanarity laser module and a flip-chip vision module for the IC head can now be used as optional extras.
A wafflepack changer may be used to supply the components.
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 0 Introduction
Edition 03/98 from Software Version SR.404.xx 0.2 Technical Data
0 - 9
0.2 Technical Data
0.2.1 Siplace 80S-20
0.2.1.1 Gantry Axes 1 and 2
0.2.1.2 12-nozzle Revolver Head
Gantry axes 1 and 2
Drive D.C. servo motors
Path-measuring system Linear incremental scales
Resolution x / y axes 2.5 µm
Speed x axis 2.0 m/s
Speed y axis 2.0 m/s
12-nozzle revolver head
Programmable placement force (z axis) 2.0 N to 5.0 N
Nozzle types 22 (70x, 71x, 72x, 75x)
Segments 12
Components that can be assembled
Max. height 6.0 mm
Min. pitch 0.5 mm
Dimensions: 0.5 mm x 1.0 mm to 14 mm x 18 mm
Weight up to 2 grams
dp1/dp2 turning axes resolution
0.025
o
Star axis resolution
0.0025
o
Z axis stroke 16 mm