80S-2080F480F4-680F5 User’s Manual - 第139页

3 Placement Functions SIPLACE 80S-20/F4/F4-6 User’s Manual 3.2 Set-Up Edition 07/97 from Software Version SR.403.xx 3 - 10 3.2.2.1 Acceptable bar codes Click on th e Acceptable bar codes button. A l ist of pos sible ba r…

SIPLACE 80S-20/F4/F4-6 User’s Manual 3 Placement Functions

Edition 07/97 from Software Version SR.403.xx 3.2 Set-Up

3 - 9

3.2.2 Component Verification with Bar Code

NOTE

Only active when Component verification with bar code has been configured and bar codes have been

specified.

Select the track for which you wish to carry out a component verification or read the track bar code using a

hand-held bar code reader (see also Section 11.4 ). The selected track will be marked in light blue.

Click on the Component verification with bar code button. The data of the selected track will be dis-

played for checking.

Fig. 3.2.4 Component verification with bar code

- Key to Fig. 3.2.4

1 Display window for bar code comparison 2 Acceptable bar codes button

3 Manual input button 4 Data for the track displayed

Read the component bar code in from the reel.

You can also input the component bar code by hand.

1 2 3 4

3 Placement Functions SIPLACE 80S-20/F4/F4-6 User’s Manual

3.2 Set-Up Edition 07/97 from Software Version SR.403.xx

3 - 10

3.2.2.1 Acceptable bar codes

Click on the Acceptable bar codes button. A list of possible bar codes will be displayed in a selection

box. Currently a maximum of 6 different bar codes can be entered.

Fig. 3.2.5 Acceptable bar codes

- Key to Fig. 3.2.5

1 Marking for filter in the bar code 2 Acceptable bar code

3 Selection box with a maximum of 6 barcodes

NOTE :

If a position in the bar code is occupied by a filter (occupied with a star

¤), this position will not be included in

evaluation. This can be used for excluding data contained in the bar code (for example, date, company and so

on).

Read in the component bar code (see also Section 11.4).

The bar code which has been read is compared with the bar code required. Preset filters will not be

included in the comparison process.

The results of the bar code comparison will be displayed in the Bar code comparison display win-

dow.

Check the results:

Same: The bar codes are identical.

Not the same: The bar codes are not identical.

1 2 3

SIPLACE 80S-20/F4/F4-6 User’s Manual 3 Placement Functions

Edition 07/97 from Software Version SR.403.xx 3.2 Set-Up

3 - 11

If the bar code comparison shows agreement and the track is empty, click on the Refill track button or

read in the return bar code on the track bar code strip.

3.2.2.2 Manual input

If the component bar code cannot be read in from the reel, you can enter the bar code by hand.

Click on the Manual input button to enter the bar code by hand.

Fig. 3.2.6 Manual input

Read off the bar code from the components reel and enter this bar code into the input field. Press the

OK button to confirm.

The read-in bar code is compared with the bar code actually required. During this comparison, preset

filters are ignored.