80S-2080F480F4-680F5 User’s Manual - 第307页
5 Vision Functions SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 5.6 Test Component Edition 03/98 from Software Version SR.404.xx 5 - 86 Line engine er 5.6. 4.3 Test Component Option NOTE This optio n can onl y be acti vated i…
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 5 Vision Functions
Edition 03/98 from Software Version SR.404.xx 5.6 Test Component
Line engineer 5 - 85
Fig. 5.6.11 Test component menu, Display component video image
– Use Esc to end the function. The video image disappears and the Test component menu is displayed
once more.
GF No. = 5Display component
5 Vision Functions SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
5.6 Test Component Edition 03/98 from Software Version SR.404.xx
5 - 86 Line engineer
5.6.4.3
Test Component
Option
NOTE
This option can only be activated if you have already loaded a package form number and a component has
been picked up.
If a component is not optically centered you will have the possibility of checking the centering procedure with
this option. The measurement results are displayed on the screen but not saved.
Fig. 5.6.12 Test component menu, Test component option
When this option is activated the following actions are started:
– The measurement procedure is activated.
– The video image appears on the screen.
– The header and footers are displayed.
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 5 Vision Functions
Edition 03/98 from Software Version SR.404.xx 5.6 Test Component
Line engineer 5 - 87
Fig. 5.6.13 Test component menu, Test component video image
With the Return key you can call all defined individual steps in the measurement procedure one after the
other. Each time you press the Return key a measurement command is given and the results shown on
the screen.
Use Esc to quit the option. The video image closes and the Test component menu reappears.
GF No. = 5Test component
RET: Test component