80S-2080F480F4-680F5 User’s Manual - 第389页
5 Vision Functions SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 5.11 Coplanarity Laser Module (SIPLACE 80F4, 80F4 -6 or 80F 5 only) Edition 03/98 from Software Version SR.404.xx 5 - 168 Line engine er
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 5 Vision Functions
Edition 03/98 from Software Version SR.404.xx 5.11 Coplanarity Laser Module (SIPLACE 80F4, 80F4 -6 or 80F5 only)
Line engineer 5 - 167
5.11.5 Entering Data
– Coplanarity measurement must have been added, via the GF editor, to the Handling rules. (See Section
5.4.4 of the SIPLACE UNIX line computer user’s manual).
– Add the maximum coplanarity deviation (see Max. component height tolerance in Section 5.2.5 Func-
tion of the Cluster Editor of the SIPLACE UNIX line computer user’s manual).
NOTE
In the Placement options menu (see Section 5.3 of this user’s manual) you can deactivate or activate the
coplanarity laser module. Coplanarity measurement can be switched on or off for all of those components for
which coplanarity measurement has been set in the package form data.
r
5 Vision Functions SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
5.11 Coplanarity Laser Module (SIPLACE 80F4, 80F4 -6 or 80F5 only) Edition 03/98 from Software Version SR.404.xx
5 - 168 Line engineer
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
Edition 03/98 from Software Version SR.404.xx
6 - I
Contents
Page
6 What should you do ... ?
6.1 When you switch on the SIPLACE line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3
6.1.1 Starting the line computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 3
6.1.2 Starting the stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 3
6.1.3 Flow chart: switching on the SIPLACE line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 4
6.2 When you switch off the SIPLACE line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 6
6.2.1 Switching off the line computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 6
6.2.2 Switching off the stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7
6.3 When you change the job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8
6.4 When you change shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 9
6.5 When you, as an operator, carry out a walk-round inspection . . . . . . . . . . . . . . . . . . . 6 - 10
6.6 When you carry out a preliminary set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 12
6.7 When you change the set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13
6.7.1 What you should note when changing the feeder module . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13
6.7.2 What you should note when changing the component table . . . . . . . . . . . . . . . . . . . . . . . .6 - 13
6.8 How to avoid track errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 15
6.8.1 ... on the 2 x 8 mm tape feeder module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 15
6.8.2 ... on the 8mm S tape feeder module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 15
6.8.3 ... on the linear feeder module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 16
6.8.4 ... on the tape container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 16
6.8.5 Component coordinate system and pick-up angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 17
6.8.6 Checking the pick-up angle of the components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 18
6.9 When you refill the components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 19
6.10 When you use wafflepack magazines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 19
6.11 Operator profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 20
6.12 Tools for the operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 20
6.13 Line engineer profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 21