80S-2080F480F4-680F5 User’s Manual - 第618页
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 11 Station Extensions/Options Edition 03/98 from Software Version SR.404.xx 11.4 Component Barcode 11 - 21 11.4 Component Bar code 11.4.1 General Information The SIPLACE 80S -20/F …
11 Station Extensions/Options SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
11.3 PCB Barcode Edition 03/98 from Software Version SR.404.xx
11 - 20
11.3.8 Technical Data
PCB barcode
Resolution Finest line thickness 0.19....0.3 mm
Reading speed 600 scans/sec.
Reading distance 60...90 mm
Reading window 90 mm (max. barcode length permitted)
Angle of reading head to the barcode
5....10
o
Light source Laser diode red 670 nm
1 mW
Laser class 2
Type of protection IP 65
Readable barcode types Code 39
Code 128 / EAN 128
Code 2/5 interleaved
Codabar
2/5 IATA
2/5 INDUSTRIAL
UPC
EAN
Pharma Code
EAN Addendum
(others available on request)
Line length ≥ 4 mm
This is a precondition for 3 readings being possible
at board speeds of 300 mm/sec and a scanning
rate of 600 scans/sec.
Contrast ratio as per DIN 66236 ≥ 70 %
Permitted color of lines black
dark green
dark blue
Permitted background colors white
beige
yellow
orange
Barcode length
(including the two end areas)
≤ 90 mm
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 11 Station Extensions/Options
Edition 03/98 from Software Version SR.404.xx 11.4 Component Barcode
11 - 21
11.4 Component Barcode
11.4.1 General Information
The SIPLACE 80S-20/F
4
/F
4
-6/F
5
placement machine allows you to make sure track occupancy is correct by
means of a barcode reader and to read component data from, for example, component reels.
The barcodes are read in using a barcode reader connected to the station computer.
Fig. 11.4.1 Component barcode reader connected to the Siplace machine
- Key to Fig. 11.4.1
1 Barcode reader 2 Holder for barcode reader
11 Station Extensions/Options SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
11.4 Component Barcode Edition 03/98 from Software Version SR.404.xx
11 - 22
l Track occupancy
For track occupancy, black sheet steel plates with four-place barcode strips are fitted on the lateral protec-
tive panels. The first place is used for identifying the component table (1 or 2) while the remaining three
places specify the track numbers. Return barcodes are provided at each end of the label. These have the
same function as the Return key on the keyboard. These barcode strips are numbered consecutively in
increments of two (1, 3, 5, 7 and so on) and apply in each case to 2 tracks (for example, bar code 1 =
tracks 1 and 2).
l Components
In order to compare, for example, the stock of components with the numbers required by the set-up file
(refill check), data can be read off the component reels.
You will hear an acoustic signal each time a data record is read in successfully.
NOTE
The Components barcode reader option must be configured in the line computer.
NOTE
Bar codes which begin with the number 1 or 2 and are 4 characters long are interpreted as track barcodes. All
other bar codes which begin with the number 1 or 2 are interpreted as component barcodes.