80S-2080F480F4-680F5 User’s Manual - 第677页

11 Station Extensions/Options SIPLACE 80S-20/F4/F4-6/F5 User’s M anual 11.10 Twin Conveyor Edition 03/ 98 from Software Version SR.404.xx 11 - 80

SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 11 Station Extensions/Options

Edition 03/98 from Software Version SR.404.xx 11.10 Twin Conveyor

11 - 79

11.10.7 Technical Data

11.10.8 Maintenance

The individual transport conveyors and additional lifting table are maintained in exactly the same way as the

standard transport. The maintenance for each transport conveyor must be carried out as described in section

9.3.2 of these operating instructions.

PCBs for twin conveyor

PCB transport system Inline transport with width adjustment

PCB format

50 mm x 50 mm to 460 mm x 216mm

(if the PCBs are of the same size)

Component-free guiding edge of the

PCB

3 mm

PCB thickness 0.4 - 5 mm (including warpage)

PCB buffer For two PCBs per transport side

Clearance beneath PCB 40 mm

Lifting table For max. PCB widths of 216 mm

11 Station Extensions/Options SIPLACE 80S-20/F4/F4-6/F5 User’s Manual

11.10 Twin Conveyor Edition 03/98 from Software Version SR.404.xx

11 - 80

SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 11 Station Extensions/Options

Edition 03/98 from Software Version SR.404.xx 11.11 Feeder Position Recognition

11 - 81

11.11 Feeder Position Recognition

11.11.1 General

The feeders can be measured if they are equipped with fiducials.

This function also supports the wafflepack magazine holder (manual tray holder) if it is equipped with fiducials.

If the "Feeder position recognition" function is preset by the line computer, then this function will appear in the

machine options.

In the machine options you can also activate or deactivate feeder position recognition at the station con-

cerned.

Fig. 11.11.1 Feeder position recognition

PLEASE NOTE:

The "Feeder position recognition" function is always switched off when the station is switched on.