80S-2080F480F4-680F5 User’s Manual - 第8页

0 Introduction SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 0.1 General Edition 03/98 from Software Vers ion SR.404.xx 0 - 4 WARNING Do not per form any wor k on the m achine u nless you have a det ailed knowledge of the corr…

100%1 / 744
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 0 Introduction
Edition 03/98 from Software Version SR.404.xx 0.1 General
0 - 3
0.1 General
This user’s manual is a handbook and reference book for setting up and operating the SIPLACE 80S-20/F
4
/
F
4
-6/F
5
placement machine. It covers the SIPLACE 80S-20 and the SIPLACE 80F
4
/F
4
-6/F
5
. Many functions
are identical and are therefore described using just the SIPLACE 80F
4
/F
4
-6/F
5
as the example. This means
that various functions which are described for the SIPLACE 80F
4
/F
4
-6/F
5
also apply to the SIPLACE 80S-20.
Where information, menu functions and so on for the SIPLACE 80S-20 vary from those of the SIPLACE 80F
4
/
F
4
-6/F
5
, this will be indicated separately in the corresponding chapters of this user’s manual.
The header lines show the software version. This software version is valid for the section in question. The fol-
lowing software versions are supplemented by additions in the individual sections and this noted by means of
the software version information header lines. In other words, if the header line includes "from Software
Version 403.xx" this section will also apply to a later software version, for example "404.xx".
NOTE
Should you require further information or should problems be encountered which are not dealt with in enough
detail in this user’s manual, please contact:
Siemens AG
PL EA 1 V 2
Rupert-Mayer-Straße 44
D - 81359 Munich
Tel. +49 89 722 - 48642
Fax +49 89 722 - 24260
0.1.1 About this User’s Manual
In most plants different people are responsible for operating, setting up and programming. This is the reason
why the operator need not for example have a detailed knowledge of all functions of the system. In addition
physical injuries and damage to property may be the result of untrained personnel carrying out actions without
possessing the corresponding background knowledge. This is why certain functions which can only be carried
out by personnel specifically trained in them are protected by passwords. This division of responsibilities is
also reproduced in the user’s manual in the information boxes. On those pages for the higher user class the
user class is shown in the footer as well.
Those pages where the footer does not show a user class contain the basic information the operator needs to
operate the machine.
For the higher user classes the corresponding pages contain all additional information.
0 Introduction SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
0.1 General Edition 03/98 from Software Version SR.404.xx
0 - 4
WARNING
Do not perform any work on the machine unless you have a detailed knowledge of the corresponding part of
the user’s manual! All work must always be performed by correspondingly trained and qualified personnel! All
WARNING, CAUTION and DANGER information must be observed under all circumstances!
NOTE
We should like to point out that the contents of this User’s Manual does not constitute part of a previous or
existing agreement, commitment or legal relationship nor is it intended to modify such. All obligations of Sie-
mens AG derive from the sales contract in question, which also contains complete warranties with general
validity. These contractual provisions relating to warranty are neither extended nor limited by the information
contained in this user’s manual.
0.1.2 Release Notes
First version User’s Manual SIPLACE 80S-20/F
4
Edition 11/95
Basic version User’s Manual SIPLACE 80S-20/F
4
Edition 01/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 03/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 06/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 03/97
Revised version of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6 Edition 07/97
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6/F
5
Edition 03/98
0.1.2.1 Survey of 03/96 Revision
Revised functions Chapters / Sections affected
Nozzle, type 412, for flip chips 11.5; 17.2
Nozzle contour diagrams 17.1
Overview of nozzles 17.2
PCB barcode configured for COM 2 11.3
Maintenance of gantry / revolver head / IC head 9
Maintenance schedules 9
Setting the components illumination at the revolver
head camera
7.6.5
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 0 Introduction
Edition 03/98 from Software Version SR.404.xx 0.1 General
0 - 5
0.1.2.2 Survey of 06/96 Revision
0.1.2.3 Survey of 03/97 Revision
New functions Chapters / Sections affected
Multiple Bar code 5.4.2
Twin conveyor 6; 11(so far only the software has been imple-
mented)
Fluxing 11.7
Remote Service 11.8
GEM Interface 11.9
On-line help expansions 4
Diagnostics 19.2
Conveyor limit stop right / left LC UNIX User’s Manual
Section 12.1 Configuration editor
Revised functions Chapters / Sections affected
Notes on Touch Screen 2
Vision systems 7
Maintenance schedules 9
Maintenance of gantry / revolver head / IC head 9
Revised functions Chapters / Sections affected
Maintenance of empty tape cutter 9.1.4; / 9.2; / 9.3.4
Maintenance of components table 9.1.4; / 9.2; / 9.3.3
Maintenance of revolver head 9.1.4; / 9.2; / 9.5.6 Vacuum/Forced air valves