00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第108页

SW 703 Option WPC - Magnet s Under The Carrier : 108 Magnets Under The C arrier 1. Physically check if there are magnets st uck underneath the carrier above Note: This can also result in cr ash of system.

SW 703 Option WPC - Loading Position Of The Carrier :

107

Loading P osition Of The Carrier

1. Check if all carriers are loaded into the WPC with the

correct edge (Cut) facing inward

Note: A crash may occur if the above step is not followed.

SW 703 Option WPC - Magnets Under The Carrier :

108

Magnets Under The C arrier

1. Physically check if there are magnets stuck

underneath the carrier above

Note: This can also result in crash of system.

SW 703 Option WPC - Filling the WPC :

109

Filling the WPC

1. Message indicating WPC needs to be filled.

2. Click on ‘Locations’ icon.