00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第122页
SW 703 Prepare the line – Important Factors - Reject Rate : 122 Reject Rate 1. Set the correct pick u p position at the feeder! 2. Set the correct pitch! 3. Use the set up repo rt sheet to check that the pick up angle at…
SW 703 Prepare the line – Important Factors - Important Factors for Prepare the Line :
121
Important Factors for Prepare the Line
Most Important Factors – Reject Rate
Results – Higher Production Costs
Tasks that can cause a high Reject Rate
Incorrect Pick up Position set at feeder or MTC
Incorrect setting of feeder pitch.
Incorrect pick up angle programmed for feeder or MTC
Operations Success Measures
Reject Rate levels after a product starts to run at the line.
Number of machine stops after the start of production due to feeder jams or errors.
Operations Target
Reject Rate remains low and stable after production start up!
Zero machine stops due to feeder jams or errors!
SW 703 Prepare the line – Important Factors - Reject Rate :
122
Reject Rate
1. Set the correct pick up position at the feeder!
2. Set the correct pitch!
3. Use the set up report sheet to check that the pick up
angle at the feeder is correct!
4. The reject rate should not increase!
703-GUI Overview - PCB Information :
123
703-GUI O verview
1. Machine Model
2. Setup - Production Line & Resources needed
3. Recipe – the product that has been downloaded and
will run on the line.
4. Board – the PCB for the product that will be produced
on the line.
5. GUI Start/Stop Process Icon / Button – click here to
start the machine.