00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第136页
Refilling Component Ree ls - Cleaning Tasks : 136 Cleaning Tasks 1. Check the cover tape holder on the feeders and remove any excessive tape. 2. Empty t he cover tape h olders on s everal feeders each time you perform th…
Refilling Component Reels - After Splicing :
135
After Splicing
1. Wrap the excess tape onto the new reel.
2. Place the reel into the table reel holder bin.
Refilling Component Reels - Cleaning Tasks :
136
Cleaning Tasks
1. Check the cover tape holder on the feeders and
remove any excessive tape.
2. Empty the cover tape holders on several feeders
each time you perform the task.
3. Empty the waste tape bins under the tables regularly.
4. Whenever there is a short break in production take
the chance to carefully vacuum around the feeders to
remove any loose components.
NOTICE! Use the in built cutter to cut the tapes.
Check the cover tape holders regularly at the line –
minimum each time you splice a reel.
703 Running the line – Important Factors - Most Important Factor for Keeping the Line Running :
137
703 Running th e line – Importan t Factors
Most Important Factors – Line Downtime
Results –Lost Production Output
Tasks that can cause a high Downtime
Not refilling empty reels – feeders run out of components.
Incorrect splicing of tapes – feeders jam and have errors.
Operations Success Measures
Number of machine stops / shift due to feeders running empty.
Number of machine due to feeder jams or errors.
Operations Target
Zero machine stops due to feeders running empty!
Zero machine stops due to feeder jams or errors!