00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第182页
Weekly PM (70x) - Cleaning C eramic Nozzles - Overview : 182 Cleaning Ceramic No zzles - Overview All Ceramic nozzles should be removed and cleaned. All plastic nozzles should be checked for damage / wea r an d replaced …
Weekly PM (70x) - Clean inside the machine :
181
Clean inside the machine
Have everything ready before you start maintenance!
1. Use lint free cloths to clean the metal surfaces of the
machine.
2. Sweep around the feeder tables to remove any waste
tape that is on the floor.
3. Clean the X & Y axis linear guides using a SIPLACE
cleaning cloth.
4. Clean the X&Y axis magnetic surfaces using a lint
free cloth.
5. Clean the X&Y axis linear scales using a lint free cloth
moistened with Ethanol Alcohol.
Make sure you clean the scales after the guides and the
magnets.
WARNING! Do not apply too much pressure or
use any aggressive cleaning solution when cleaning the
scales.
Weekly PM (70x) - Cleaning Ceramic Nozzles - Overview :
182
Cleaning Ceramic Nozzles - Overview
All Ceramic nozzles should be removed and cleaned. All
plastic nozzles should be checked for damage / wear and
replaced if needed.
1. Ceramic nozzles before cleaning.
2. Nozzle Magazine Exchange.
(A) To remove - push spring plate forward to release the
magazine.
(B) Tilt the magazine back and lift up.
(C) To replace – Slot back of magazine into rear clip.
(D) Align holes in magazine with pins.
Weekly PM (70x) - Nozzle Cleaning Tools :
183
Nozzle Cle aning Tools
The nozzle cleaning tool set allows you to easily transfer
nozzles from the changer magazine into the cleaning
appliance and directly into the cleaning bath filled with
distilled water.
1. Cleaning appliance is fitted to the nozzles in the
magazine.
2. All nozzles are removed from the magazine in 1
action.
3. The ultrasonic bath is filled with distilled water to the
level (A).
4. After cleaning in the ultrasonic bath the groove plate
is fitted to the cleaning appliance and the nozzle
brush is used to remove any remaining dirt.