00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第190页
Weekly PM (70x) - Nozzle Centering for C&P 20 heads. : 190 Nozzle Ce ntering fo r C&P 20 heads. 1. Select the button / icon ‘All nozzles’. 2. Select t he button / icon ‘Center’. 3. The head will now per form this…
Weekly PM (70x) - Vacuum Checks and Height Reference Run :
189
Vacuum Ch ecks and Height Reference R un
1. Pick up the nozzles for all heads from the nozzle
changers.
2. Make a vacuum test for all heads.
If there are any problems with the test contact your
supervisor.
3. Click ‘Head Nozzle Offset’ icon / button to make a
height reference run for all heads.
Should any nozzles fail the test check that they a seated
correctly and then repeat the test. If the failure is
repeated contact your supervisor.
Weekly PM (70x) - Nozzle Centering for C&P 20 heads. :
190
Nozzle Centering for C&P 20 heads.
1. Select the button / icon ‘All nozzles’.
2. Select the button / icon ‘Center’.
3. The head will now perform this task.
Repeat this function for all C&P20 heads.
If any errors occur during this procedure contact your
supervisor.
Weekly PM (70x) - Production Start Up :
191
Production Start Up
After the work is completed you can restart production
and start PCBs entering the line.
1. Click on the Conveyor input icon.
2. Select ‘All input conveyors’ – ‘Unblock’.
3. Confirm by clicking ‘OK’.