00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第4页

4 Inhaltsverzeichnis 2.5 SIPLACE SX-Series mac hine ty pes 33 2.6 SIPLACE SX-Series machine setup 34 2.7 SIPLACE SX-Series machine setup 35 2.8 SIPLACE placement hea ds and conveyor typ es 36 2.9 SIPLACE feeder modules 3…

Operator Guide SIPLACE Operation of X and SX-Series with SSC

Inhaltsverzeichnis

Table of Contents

1 Machine Safety (70x) 15

1.1 Warning Labels - General 15

1.2 Warning Labels - Permanent Magnets 16

1.3 Warning Labels - Tape Cutters 17

1.4 Warning Labels - Lasers 18

1.5 High temperatures related to CP20 head and X feeders. 19

1.6 High temperatures related to Head Control Unit. 20

1.7 Buttons and switches - X-series machines 21

1.8 Safety Covers - X-series machines 22

1.9 Safety Covers – X-series machines 23

1.10 Buttons and switches - SX-series machines 24

1.11 Safety Covers - SX-series machines 25

1.12 Safety Covers – SX-series machines 26

1.13 Further Safety Information 27

2 Machine Overview (70x) 29

2.1 Basic machines in a typical SMT line setup 29

2.2 SIPLACE X-Series machine types 30

2.3 SIPLACE X-Series machine setup 31

2.4 SIPLACE X-Series machine setup 32

Inhaltsverzeichnis

2.5 SIPLACE SX-Series machine types 33

2.6 SIPLACE SX-Series machine setup 34

2.7 SIPLACE SX-Series machine setup 35

2.8 SIPLACE placement heads and conveyor types 36

2.9 SIPLACE feeder modules 37

3 Nozzles (70x) 39

3.1 Overview Head Types vs. Nozzles 39

3.2 Keep the Ceramic Nozzles Clean! 40

4 Preparing the Component Set Up 41

4.1 What makes a Set-Up? 41

4.2 Steps to prepare a product to run at the line 42

4.3 Printing a Set Up report 43

4.4 Reading / Interpreting Of The Table Set Up Sheet 44

5 Setting Up X-Feeders 45

5.1 Overview - Component Table 45

5.2 Inserting the Feeder Module 46

5.3 Overview - Features and Controls 47

5.4 Preparing the Feeder - Inserting the spacer (Tape Support) 48

Operator Guide SIPLACE Operation of X and SX-Series with SSC

Inhaltsverzeichnis

5.5 Preparing the Feeder - Removing the spacer (Tape Support) 49

5.6 Loading Feeders - Preparation of the tape 50

5.7 Loading Feeders - Inserting the tape 51

5.8 Loading Feeders - Inserting the tape 52

5.9 Loading Feeders - Inserting the Cover tape 53

5.10 Unloading Feeders - Removing a tape 54

5.11 Unloading Feeders - Removing a Feeder 55

5.12 Control panel and status display 56

5.13 8mm X - Pick-up positions 57

5.14 8mm X - Setting the Pick-up position 58

5.15 12mm X - Pick-up positions 59

5.16 12mm X - Setting the Pick-up position 60

5.17 16 - 88mm X - Correct pick-up position and setting 61

5.18 8 - 88mm X - Possible Pitch settings 62

5.19 8 - 88mm X - Setting the pitch 63

5.20 8 - 88mm X - Setting the transport speed 64

5.21 Offline Setup Verification 65

5.22 Supports for heavy component reels 66

6 SW 703 Changing the tables 67

6.1 Changing of Table - Preparation 67