00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第5页
Operator Guide SIPLAC E Operation of X and SX-Series with SSC Inhaltsverzeichnis 5 5.5 Preparing the Feeder - Remov ing the spacer (Tape Suppor t) 49 5.6 Loading Feeders - Prepar ation of the tape 50 5.7 Loading Feeders …
4
Inhaltsverzeichnis
2.5 SIPLACE SX-Series machine types 33
2.6 SIPLACE SX-Series machine setup 34
2.7 SIPLACE SX-Series machine setup 35
2.8 SIPLACE placement heads and conveyor types 36
2.9 SIPLACE feeder modules 37
3 Nozzles (70x) 39
3.1 Overview Head Types vs. Nozzles 39
3.2 Keep the Ceramic Nozzles Clean! 40
4 Preparing the Component Set Up 41
4.1 What makes a Set-Up? 41
4.2 Steps to prepare a product to run at the line 42
4.3 Printing a Set Up report 43
4.4 Reading / Interpreting Of The Table Set Up Sheet 44
5 Setting Up X-Feeders 45
5.1 Overview - Component Table 45
5.2 Inserting the Feeder Module 46
5.3 Overview - Features and Controls 47
5.4 Preparing the Feeder - Inserting the spacer (Tape Support) 48
Operator Guide SIPLACE Operation of X and SX-Series with SSC
Inhaltsverzeichnis
5
5.5 Preparing the Feeder - Removing the spacer (Tape Support) 49
5.6 Loading Feeders - Preparation of the tape 50
5.7 Loading Feeders - Inserting the tape 51
5.8 Loading Feeders - Inserting the tape 52
5.9 Loading Feeders - Inserting the Cover tape 53
5.10 Unloading Feeders - Removing a tape 54
5.11 Unloading Feeders - Removing a Feeder 55
5.12 Control panel and status display 56
5.13 8mm X - Pick-up positions 57
5.14 8mm X - Setting the Pick-up position 58
5.15 12mm X - Pick-up positions 59
5.16 12mm X - Setting the Pick-up position 60
5.17 16 - 88mm X - Correct pick-up position and setting 61
5.18 8 - 88mm X - Possible Pitch settings 62
5.19 8 - 88mm X - Setting the pitch 63
5.20 8 - 88mm X - Setting the transport speed 64
5.21 Offline Setup Verification 65
5.22 Supports for heavy component reels 66
6 SW 703 Changing the tables 67
6.1 Changing of Table - Preparation 67
6
Inhaltsverzeichnis
6.2 Changing of Table – Stop Production 68
6.3 Changing of Table – move gantry. 69
6.4 SIPLACE SX – remove table 70
6.5 SIPLACE X – remove table 71
6.6 Changing of Table - remove 72
6.7 SIPLACE SX – reload table 73
6.8 SIPLACE X – reload table 74
7 SW 703 Downloading a Recipe 75
7.1 LC GUI – Most Important Buttons 75
7.2 Download of a Recipe. 76
7.3 Download Complete. 77
7.4 Change conveyor width – remove support pins. 78
7.5 Successful Recipe Sent 79
7.6 Unsuccessful Recipe Send 80
7.7 Changing the nozzle changer setup. 81
7.8 Changing the nozzle changer configuration. 82
7.9 Nozzle changer setup is complete. 83
7.10 Online Setup Verification 84
8 SW 703 Option MTC 85