00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第6页
6 Inhaltsverzeichnis 6.2 Changing of Table – Stop Pr oduction 68 6.3 Changing of Table – move gantry. 69 6.4 SIPLACE SX – remove table 70 6.5 SIPLACE X – remove table 71 6.6 Changing of Table - re move 72 6.7 SIPLACE SX …
Operator Guide SIPLACE Operation of X and SX-Series with SSC
Inhaltsverzeichnis
5
5.5 Preparing the Feeder - Removing the spacer (Tape Support) 49
5.6 Loading Feeders - Preparation of the tape 50
5.7 Loading Feeders - Inserting the tape 51
5.8 Loading Feeders - Inserting the tape 52
5.9 Loading Feeders - Inserting the Cover tape 53
5.10 Unloading Feeders - Removing a tape 54
5.11 Unloading Feeders - Removing a Feeder 55
5.12 Control panel and status display 56
5.13 8mm X - Pick-up positions 57
5.14 8mm X - Setting the Pick-up position 58
5.15 12mm X - Pick-up positions 59
5.16 12mm X - Setting the Pick-up position 60
5.17 16 - 88mm X - Correct pick-up position and setting 61
5.18 8 - 88mm X - Possible Pitch settings 62
5.19 8 - 88mm X - Setting the pitch 63
5.20 8 - 88mm X - Setting the transport speed 64
5.21 Offline Setup Verification 65
5.22 Supports for heavy component reels 66
6 SW 703 Changing the tables 67
6.1 Changing of Table - Preparation 67
6
Inhaltsverzeichnis
6.2 Changing of Table – Stop Production 68
6.3 Changing of Table – move gantry. 69
6.4 SIPLACE SX – remove table 70
6.5 SIPLACE X – remove table 71
6.6 Changing of Table - remove 72
6.7 SIPLACE SX – reload table 73
6.8 SIPLACE X – reload table 74
7 SW 703 Downloading a Recipe 75
7.1 LC GUI – Most Important Buttons 75
7.2 Download of a Recipe. 76
7.3 Download Complete. 77
7.4 Change conveyor width – remove support pins. 78
7.5 Successful Recipe Sent 79
7.6 Unsuccessful Recipe Send 80
7.7 Changing the nozzle changer setup. 81
7.8 Changing the nozzle changer configuration. 82
7.9 Nozzle changer setup is complete. 83
7.10 Online Setup Verification 84
8 SW 703 Option MTC 85
Operator Guide SIPLACE Operation of X and SX-Series with SSC
Inhaltsverzeichnis
7
8.1 Option - MTC 85
8.2 Numbering System Of Levels (Towers 1 & 2) 86
8.3 Numbering System Of Levels (Towers 1 & 2) 87
8.4 Removal Of Carriers for both Towers 88
8.5 Loading Of Carrier for both Towers 89
8.6 Loading Position Of The Carrier (Tower 1) 90
8.7 Loading Position Of The Carrier (Tower 2) 91
8.8 Magnets Under The Carrier 92
8.9 Locking Of The Leaf Springs (Towers 1 & 2) 93
8.10 Filling MTC 94
8.11 Set Up Sheet for MTC 95
8.12 Filling the MTC 96
8.13 Moving to the Refill position 97
8.14 Refill Completed 98
8.15 MTC verification 99
8.16 Checklist for MTC Preparation. 100
9 SW 703 Option WPC 101
9.1 Option WPC 101
9.2 Condition Of The Carrier 102
9.3 Numbering System Of Level 103