00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第67页

SW 703 Changing the tables - Changing of Table - Preparation : 67 SW 703 Ch anging the tables 1. Station must be in suspended mode 2. Click on the ‘Manu al Operations’ icon.

Setting Up X-Feeders - Supports for heavy component reels :

Supports for heavy component reels

NOTICE! Heavy component reels should be

supported using special pins.

1. Insert the pin into the hole in the center of the reel.

2. Fit the pin into the notches of the separator plates so

that the reel is suspended and can move easily.

SW 703 Changing the tables - Changing of Table - Preparation :

SW 703 Ch anging the tables

1. Station must be in suspended mode

2. Click on the ‘Manual Operations’ icon.

SW 703 Changing the tables - Changing of Table – Stop Production :

Changing of Table – Stop Production

1. Manual Operations window

2. Click on the ‘Do not change production status’.

This action will prevent production starting again until you

want it to.