00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第79页
SW 703 Downloading a Recipe - Successful Rec ipe Sent : 79 Successful Recipe Sent 1. The name of the Setup, Recipe and Board will appear on each SIPLACE machine if the download is successful.
SW 703 Downloading a Recipe - Change conveyor width – remove support pins. :
78
Change conveyor width – remove support pins.
If required the machine PCB conveyors will automatically
adjust to the correct position for the new PCB. Before
they do this you must remove any magnetic support pins
to prevent damage to the conveyor system.
1. Once you have removed the support pins click ‘OK’.
The conveyors will now move to the correct position.
Replace the support pins in the correct position for the
new PCB.
SW 703 Downloading a Recipe - Successful Recipe Sent :
79
Successful Recipe Sent
1. The name of the Setup, Recipe and Board will appear
on each SIPLACE machine if the download is
successful.
SW 703 Downloading a Recipe - Unsuccessful Recipe Send :
80
Unsuccess ful Recipe Send
1. If the is any problem with the download a message
will appear to notify you.
The most common reason is that a change is required for
the nozzle changer configuration.
NOTICE! If any other message appears then
notify your supervisor.