00196851-02 OG SIPLACE Operation of X and SX-Series with SSC (SW70x) - 第82页
SW 703 Downloading a Recipe - C hanging the nozzle changer confi gurati on. : 82 Changing t he nozzle change r configuration. (A) Magazine Exchange Pr ocedure. 1. To re move – push t he spr ung lever down to release the …
SW 703 Downloading a Recipe - Changing the nozzle changer setup. :
81
Changing t he nozzle change r setup.
1. Select the ‘Locations’ icon.
2. The nozzle change icon will be shown in red, click on
the icon to enter the menu.
SW 703 Downloading a Recipe - Changing the nozzle changer configuration. :
82
Changing t he nozzle change r configuration.
(A) Magazine Exchange Procedure.
1. To remove – push the sprung lever down to release
the magazine.
2. Tilt the magazine back and lift up.
3. To replace – slot the back of the magazine against
the rear pins.
4. Push the magazine down until it clicks in place.
(B) Magazine garage numbering.
(C) Magazine numbers – locations 1 & 2.
(D) Magazine numbers – locations 3 & 4.
(T) Transport direction.
SW 703 Downloading a Recipe - Nozzle changer setup is complete. :
83
Nozzle changer setup is complete.
1. Once the changes have been made the icons will no
longer be red and you are ready to start production.