182050 User manual - 第116页

semi automatic 6(735()(5(1 &(6 35()(5(1&(6 2.6 User Manual Software Version 07SP02 2. T ype vorton using t he keyboard. 3. Press Enter , the message ‘ V ortex Under-Screen Cleaner Enabled ’ is display ed in the …

100%1 / 266
semi automatic
6(735()(5(1&(6
35()(5(1&(6
Software Version 07SP02 User Manual 2.5
Blue Under Screen
Cleaner
To enable the blue under screen cleaner carry out the following:
1. Press the function key F10 on the keyboard, the following window is
displayed:
2. Type bluon using the keyboard.
3. Press Enter, the message ‘Blue Under-Screen Cleaner Enabled’ is dis-
played in the message prompt bar.
4. Press Exit.
To disable the blue under screen cleaner carry out the following:
1. Press the function key F10 on the keyboard, the following window is
displayed:
2. Type bluoff using the keyboard.
3. Press Enter, the message ‘Blue Under-Screen Cleaner Disabled’ is
displayed in the message prompt bar.
4. Press Exit.
Vortex Under
Screen Cleaner
To enable the Vortex under screen cleaner carry out the following:
1. Press the function key F10 on the keyboard, a window of the following form
is displayed:
NOTE
If the blue under screen cleaner is currently enabled, carry out disabling the
blue under screen cleaner first.
Enter to Close ...
Serial Number
Executable date
Executable time
Executable name
Software Version
Options Enabled
:
:
:
:
:
:
276178
August 19 2002
10:57:38
RTX494.EXE
RTX494.00
BF
DEK VIKING
Enter to Close ...
Serial Number
Executable date
Executable time
Executable name
Software Version
Options Enabled
:
:
:
:
:
:
276178
August 19 2002
10:57:38
RTX494.EXE
RTX494.00
BF
DEK VIKING
Enter to Close ...
Serial Number
Executable date
Executable time
Executable name
Software Version
Options Enabled
:
:
:
:
:
:
276178
August 19 2002
10:57:38
RTX494.EXE
RTX494.00
BF
DEK VIKING
semi automatic
6(735()(5(1&(6
35()(5(1&(6
2.6 User Manual Software Version 07SP02
2. Type vorton using the keyboard.
3. Press Enter, the message ‘Vortex Under-Screen Cleaner Enabled ’is
displayed in the message prompt bar.
The Vortex under screen cleaner becomes the current cleaner and all
cleaner parameters become appropriate to the Vortex cleaner.
The value of the configuration parameter cleaner type is set to Vortex and
this parameter is written to the configuration file.
4. Press Exit.
To disable the Vortex under screen cleaner carry out the following:
1. Press the function key F10 on the keyboard, a window of the following form
is displayed:
2. Type vortoff using the keyboard.
3. Press Enter, the message Vortex Under-Screen Cleaner Disabled is
displayed in the message prompt bar.
4. Press Exit.
Board Stop X
Offset
This parameter allows a value to input which compensate for variations in the
focal lengths of the vision systems between machines.
Machine Location This allows the operator to enter text to uniquely identify the machine. Output
is via SPC.
On selecting Incr. with machine locations highlighted, the message ‘Please
type in the text, then press Return’ is displayed. The menu softkeys are
blanked out.
Generic Tooling This preference enables enhanced tooling setup, allowing the operator to step
between various elevations of the rising table between home height and contact
height. At contact height an operator can check that the setup of the tooling is
adequate for the current product. The options are:
Enter to Close ...
Serial Number
Executable date
Executable time
Executable name
Software Version
Options Enabled
:
:
:
:
:
:
276178
August 19 2002
10:57:38
RTX494.EXE
RTX494.00
BF
DEK VIKING
Minimum Maximum Default
20mm 40mm 28mm
Options Default
Enabled Enabled
Disabled
semi automatic
(55250(66$*(6
,1752'8&7,21
Software Version 07SP02 User Manual 3.1
CHAPTER 3 ERROR MESSAGES
INTRODUCTION
If for any reason the machine does not complete a particular sequence in the
time allowed for in software, an error condition arises. The relevant error
message is displayed on the machine monitor.
Machine Errors are detected by sensors specifically designed for checking
correct machine status (System Power, Pneumatic Power, etc.) or by functions
failing to achieve their correct operation. These latter errors are either detected
by a limit sensor being operated or by setting a time limit for their completion.
The time limits are set so they are 1.5 times the longest possible time taken for
that particular operation, after which, if not completed, an error is reported on
the machine monitor.
When an error occurs the relevant message is displayed on the machine
monitor. The displayed error message is accompanied by information regarding
the possible causes and the corrective action to be taken.