182050 User manual - 第161页
semi automatic +286 (.( (3, 1* &23<'$ 7$ Software Version 07SP02 User Manual 6.7 The file names under each it em are as follows: If the Copy Dat a key is pressed when Product Dat a is highlighted, the messa…
semi automatic
+286(.((3,1*
&23<'$7$
6.6 User Manual Software Version 07SP02
COPY DATA
The Copy Data function allows the operator to copy data between the local hard
drive, local drive and network drives.
On selecting Copy Data the following window is displayed:
NOTE
Deviation Data is not available on this machine.
The menu bar changes to the following:
NOTE
Copy All is only available when product Data is highlighted.
The Up and Down keys move the cursor between the various data types.
The From Disk key allows selection of the disk to copy from, options are:
Local Drive; Floppy Drive; Network Drive.
The To Disk key allows selection of the disk to be copied to, options are:
Local Drive; Floppy Drive; Network Drive.
The Exit key returns to the previous menu.
The function of the Copy Data key depends upon the data type selected. If Test
Data, SPC Data, Config Data or Service Data are selected the files are
transferred directly from the source to the destination and no further options are
given.
NOTE
Copying Config Data copies the following files:
• CALIB.INI
•CONFIG.CFG
These files are required if the machine requires a Windows NT recovery
procedure.
Copy Data
Copy From: Local Drive
Copy To: Floppy Drive
Drive
Product Data
Test Data
SPC Data
Config File
Service Data
Deviation Data
Image Data
Copy
Data
Co py
All
Up Down
From
Disk
To
Disk
Exit
semi automatic
+286(.((3,1*
&23<'$7$
Software Version 07SP02 User Manual 6.7
The file names under each item are as follows:
If the Copy Data key is pressed when Product Data is highlighted, the message
‘Do you also want to create a copy of the inspection data?’ is displayed.
The following window is displayed:
The menu bar changes to the following:
The Yes key copies the highlighted product data file between the drives as
indicated, with all the inspection data that is associated with it. The message
‘Copying All Files Please Wait’ is displayed.
The No key copies the highlighted product data file between the drives as
indicated, without the inspection data that is associated with it. The message
‘Copying All Files Please Wait’ is displayed.
Test Data SPC Data Config Data Service Data
atest.dat readings.dek calib.ini service.dat
fiducial.dat config.cfg replen.dat
inspect.dat maint.dat
location.dat config.txt
offset.dat
test.dat
test.log
theta.dat
videoxy.dat
Copy Data File
Search
265TEST1
Product ID
265TEST1-
265TEST1
CALIBRA
DEFAULT
Yes No
semi automatic
+286(.((3,1*
&23<'$7$
6.8 User Manual Software Version 07SP02
If the Copy Data key is pressed when Image Data is highlighted, the following
window is displayed:
The menu bar changes to the following:
The Copy File key copies the selected product data file from the source to the
destination.
The Left and Right keys move the cursor between product file columns (if
displayed).
The Up and Down keys move the cursor between the various product data files.
The Exit key returns to the previous menu.
If the Copy All key is pressed when Product data is highlighted, the message
‘Do you also want to create a copy of the inspection data associated with
each process program that is to be copied?’ is displayed. The menu bar
changes to the following:
The Yes key copies all the highlighted product data files between the drives as
indicated, with all the inspection data that is associated with it. The message
‘Copying All Files Please Wait’ is displayed.
The No key copies all the highlighted product data files between the drives as
indicated, without the inspection data that is associated with it. The message
‘Copying All Files Please Wait’ is displayed.
Copy Data File
Insp0000
Insp0001
Insp0002
Insp0003
Insp0004
Insp0005
Copy
File
Left Right Up Down Exit
Yes No