182050 User manual - 第186页

semi automatic ',163(&7,21 ',163(&7,21 6(78 3 7.12 User Manual Software Ve rsion 07SP02 5. If t he product name is changed the mes sage ‘ Do you also want to cr eate a copy of the inspection file? …

100%1 / 266
semi automatic
',163(&7,21
',163(&7,216(783
Software Version 07SP02 User Manual 7.11
3. Use the Left, Right, Up and Down keys to highlight a product file. If the
product to be setup is a new one, select an existing product file and modify
it, (Edit Data refers).
4. Select Load.
5. Select Exit. The machine loads the product file and trains the fiducials.
Edit Data 1. If the loaded product file is the correct one, go to Step 8. If the file needs to
be modified continue with Step 2.
2. Select Setup.
3. Select Edit Data.
The following window is displayed:
4. To change the product name; highlight product name using the Next and
Previous keys. Select Incr. The message ‘Please type in the text, then
press Return’ is displayed, the menu softkeys are blanked out. Type in the
required product name and press Return using the keyboard.
Load
Rebuild
List
Left Right Up Down Exit
Load
Rebuild
List
Left Right Up Down Exit
Load
Rebuild
List
Left Right Up Down Exit
Run
Open
Cover
Paste
Load
Clean
Screen
Setup Monitor Maint.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
PRODUCT NAME
PRODUCT ID
DWELL HEIGHT
DWELL SPEED
SCREEN ADAPTOR
SCREEN IMAGE
CUSTOM SCREEN
BOARD WIDTH
BOARD LENGTH
BOARD THICKNESS
FRONT PRINT SPEED
REAR PRINT SPEED
FLOOD SPEED
PRINT FRONT LIMIT
Dek04
Dek04
30
24
NONE
EDGE
DISABLED
101.5
152.5
1.6
150
150
20
0.0
mm
mm/s
mm
mm
mm
mm/s
mm/s
mm/s
mm
.. more
Edit Current Process Parameters
semi automatic
',163(&7,21
',163(&7,216(783
7.12 User Manual Software Version 07SP02
5. If the product name is changed the message ‘Do you also want to create
a copy of the inspection file?’ is displayed. Select one of the following:
Yes - All data is copied, including the sites coordinates.
Global Only - The global parameters and limits are copied.
No - No inspection file is copied. Use when setting up an inspection file for
the first time.
6. Using the Next, Previous, Incr. and Decr. keys, edit the current process
parameters for the new product.
7. Press Save.
8. When the message ‘Board Data File Saved’ is displayed, press Exit.
9. Select Mode until Step appears in mode option of the printer status display.
If the required stencil is already in the printer go to Step 18.
If the stencil needs to be changed continue with Step 10.
10. Select Change Screen.
11. When the message ‘Open Front Cover and Remove screen’ is displayed
lift the printhead cover.
12. Remove the stencil from the printer.
13. Fit the new stencil into the printer ensuring the correct orientation of the
stencil.
14. Lower the printhead cover.
15. Press the System button.
Yes
Global
Only
No
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
semi automatic
',163(&7,21
',163(&7,216(783
Software Version 07SP02 User Manual 7.13
16. Select Change Screen.
17. Select Exit.
18. Select Run.
19. If the stencil has not been changed the message ‘Screen has not been
changed for this product’ is displayed, select Use Screen to continue.
20. Select Auto Board.
21. Setup the board and stencil fiducials.
22. Select Inspect Setup. If this option is unavailable, check set prefs for 2D
Inspection enabled. The following message on the operator prompt bar is
displayed, ‘Click on the board representation to add a new site or select
an existing site to edit’.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Run
Open
Cover
Paste
Load
Clean
Screen
Setup Monitor Maint.
Auto
Board
Manual
Board
Exit
Step
Open
Cover
Inspect
Setup
Single Exit