182050 User manual - 第215页

semi automatic &21680$ %/(5( 3/(1,6+0 (176 3$67(/2$ ',1* Software Version 07SP02 User Manual 8.7 Dispensing Pas te at Random Interval s The operator can cycle the p aste dispenser at random inte rvals and befo…

100%1 / 266
semi automatic
&21680$%/(5(3/(1,6+0(176
3$67(/2$',1*
8.6 User Manual Software Version 07SP02
2. Press Edit Data (F3).
3. Using the Next and Previous keys (F4 - F5) select the Paste Dispense
Rate.
4. Using the Incr. and Decr. keys (F6 -F7) set the required rate.
5. Using the Next key (F4) select the Paste Dispense Speed.
6. Using the Incr. and Decr. keys (F6 - F7) set the required speed.
7. Press Exit (F8).
8. Press Exit (F8).
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Save Next Previous Incr. Decr. Exit
PASTE DISPENSE RATE
PASTE DISPENSE SPEED
PASTE RECOVERY RATE
FRONT PASTE RECOVERY
REAR PASTE RECOVERY
SCREEN CLEAN MODE 1
SCREEN CLEAN RATE 1
DRY CLEAN SPEED
WET CLEAN SPEED
VAC CLEAN SPEED
VAC CLEAN START TIME
FRONT START OFFSET
REAR START OFFSET
FRONT KNEAD PRESSURE
0
30
0
0
0
NONE
0
40
40
10
1.0
30
30
0.0
Prts
mm/s
mm
mm
Prts
mm/s
mm/s
mm/s
secs
mm
mm
kg
.. more
Edit Current Process Parameters
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
semi automatic
&21680$%/(5(3/(1,6+0(176
3$67(/2$',1*
Software Version 07SP02 User Manual 8.7
Dispensing Paste at
Random Intervals
The operator can cycle the paste dispenser at random intervals and before a
print run in addition to any preprogrammed cycles.
To load paste prior to a print run:
1. Press Paste Load (F3).
2. Press Auto Dispense (F1).
3. If the paste dispenser has sufficient paste the dispenser carries out an
automatic dispense, go to Step 13. If the paste dispenser is low on paste a
warning window is displayed. The warning window varies, depending on the
setting of the consumable action option in set preferences. If the set
preference is set to warn, continue with Step 4. If the set preference is set
to pause or suspend go to Step 8.
4. If the set preference is set to warn, the following window is displayed:
5. Select Confirm (F1).
6. To replace the paste cartridge carry out the Fitting a New Paste Cartridge
procedure, later in this section.
7. Repeat Steps 1, 2 and 13.
8. If the set preference is set to pause, see a. If the set preference is set to
suspend, see b.
a. The following window and menu bar is displayed.
Run
Open
Cover
Paste
Load
Clean
Screen
Setup Monitor Maint.
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
Warning
Print Medium Low. Please replenish.
Confirm
Pause on Warning
Print Medium Low. Please replenish.
Refill
Paste
Cancel
semi automatic
&21680$%/(5(3/(1,6+0(176
3$67(/2$',1*
8.8 User Manual Software Version 07SP02
b. The following window and menu bar is displayed.
9. Select Refill Paste (F1).
NOTE
If either the under screen cleaner paper or solvent are low or the Vortex
cleaning cassette has expired and are reported first, the refill paste option
is not displayed. In this case select Cancel until Refill Paste is displayed
in the menu bar.
The message ‘Select Load Cart to load the cartridge or exit to abort.’ is
displayed.
10. Select Load Cart. (F1).
The print carriage drives to the front of the machine and the dispenser rises
to the vertical position. A message is displayed on the screen ‘Open Cover
and Replace Paste Cartridge’.
11. To replace the paste cartridge carry out Steps 3-10 of Fitting a New Paste
Cartridge procedure, later in this section.
12. Repeat Steps 1, 2 and 13.
13. After the dispense routine has been completed, press Exit (F8).
Fitting a New Paste
Cartridge
It is necessary at intervals to fit a new paste cartridge into the paste dispenser.
If there is no cartridge in the dispenser or the cartridge is empty, the warning
window ‘Print Medium Low. Please Replenish.’ is displayed.
If the consumable action option in set preferences is set to suspend, the paste
dispenser is checked to ensure availability of paste, before allowing a print run
to start. If paste isn’t available the warning window ‘Print Medium Low. Please
Replenish.’ is displayed.
WARNING
SOLDER PASTE AND SOLVENTS. WHEN USING OR HANDLING ANY SOLDER
PASTE OR SOLVENT FORMULATION THE MANUFACTURERS’ RECOMMEND
SAFETY PRECAUTIONS MUST BE STRICTLY ADHERED TO.
Suspend on Warning
Print Medium Low. Please replenish.
Refill
Paste
Cancel
Refill
Paste
Cancel
Load
Cart.
Exit
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit