182050 User manual - 第224页
semi automatic &21680$ %/(5(3/ (1,6+0 (176 %/8(81'(5 6&5(( 1&/( $1(5 8.16 User Manual Software Ve rsion 07SP02 1 1. If the set prefer ence is set to paus e, the following window is displayed: 12. Sele…
semi automatic
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
Software Version 07SP02 User Manual 8.15
4. If the set preference is set to pause, the following window and menu bar is
displayed:
If the set preference is set to suspend, the following window and menu bar
is displayed:
5. Select Cancel (F8).
6. Go to Step 17.
Replenishment During a Print Run:
If the set preference is set to warn, continue with Step 7. If the set preference
is set to pause go to Step 11. If the set preference is set to suspend go to
Step 15.
7. If the set preference is set to warn, the following window is displayed:
8. Select Confirm (F1).
9. Select End Run (F1).
10. Go to Step 17.
Pause on Warning
Cleaner Solvent Low. Please refill.
Cancel
Suspend on Warning
Cleaner Solvent Low. Please refill.
Cancel
Cancel
Warning
Cleaner paper Low. Please replace.
Confirm
End
Run
Stop
Cycle
semi automatic
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
8.16 User Manual Software Version 07SP02
11. If the set preference is set to pause, the following window is displayed:
12. Select Defer (F8). The print run continues.
13. Select End Run (F1).
14. Go to Step 17.
15. If the set preference is set to suspend, the following window is displayed:
16. Select End Run (F8).
17. Press Open Cover (F2).
18. If the paper roll is to be replenished continue with Step 19. If the solvent
tank only is to be replenished go to Step 20.
19. Press Change Screen (F2).
20. Raise the printhead cover.
21. If the paper roll is to be replenished continue with Step 22. If the solvent
tank only is to be replenished go to Solvent Replenishment section.
Pause on Warning
Cleaner Solvent Low. Please refill.
Defer
End
Run
Stop
Cycle
Suspend on Warning
Cleaner Solvent Low. Please refill.
End
Run
Run
Open
Cover
Paste
Load
Clean
Screen
Setup Monitor Maint.
Change
Screen
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
semi automatic
&21680$%/(5(3/(1,6+0(176
%/8(81'(56&5((1&/($1(5
Software Version 07SP02 User Manual 8.17
22. Toggle the screen clamp to the up position (OFF) (standard chase only).
23. Remove the stencil from the machine.
24. Go to Paper Replenishment section.
Solvent Replenishment
WARNING
RECOMMENDED SOLVENTS. ANY SOLVENTS USED MUST COMPLY WITH
LOCAL ENVIRONMENTAL GUIDELINES. DEK RECOMMEND USING SOLVENTS
THAT ARE ENVIRONMENTALLLY FRIENDLY, IE CFC FREE AND WATER BASED.
SOLVENTS USED MUST HAVE FAST EVAPORATION RATES AND FLASHPOINT
SPECIFICATIONS GREATER THAN 39ºC.
WARNING
SOLDER PASTE AND SOLVENTS. WHEN USING OR HANDLING ANY SOLDER
PASTE OR SOLVENT FORMULATION THE MANUFACTURERS’ RECOMMEND
SAFETY PRECAUTIONS MUST BE STRICTLY ADHERED TO.
WARNING
PROTECTIVE CLOTHING. APPROVED PROTECTIVE CLOTHING SHOULD BE
WORN BY SOLDER PASTE AND SOLVENT HANDLERS AT ALL TIMES TO
ELIMINATE FUME INHALATION, EYE CONTACT, SKIN CONTACT AND
INGESTION.
WARNING
SOLVENT SOLUTION. DO NOT MIX SOLVENT SOLUTIONS. FLUSH THE
SOLVENT TANK THOROUGHLY WHEN CHANGING TO A DIFFERENT SOLVENT
SOLUTION.