182050 User manual - 第263页
semi automatic &21680$ %/(5( 3/(1,6+0 (176 352)/2: Software Version 07SP02 User Manual 8.55 6. Select Remove Cover (F8 ). The message ‘ Open the printer cover and remove the ProFlow unit ’ s base cover ’ is di splay…
semi automatic
&21680$%/(5(3/(1,6+0(176
352)/2:
8.54 User Manual Software Version 07SP02
11. Using a spatula, smooth and level the paste to the height of the blades.
NOTE
Pack any excess paste on the spatula between the blades.
12. If necessary clean the wiper blades and skis so that they are not contami-
nated with paste.
NOTE
For effective cleaning, DEK recommend the use of IPA impregnated wipes
(Part No.141150).
13. Fit cover to the unit.
14. Fit the transfer head unit to the ProFlow pressure mechanism on the
machine, (refer to ProFlow chapter in the Technical Reference manual for
detailed information on unit removal/fitting).
Replenishment 1. If the ProFlow unit is in the home position continue with Step 2. If the
ProFlow unit is in the contact position go to Step 19.
2. Select Setup (F6).
3. Select Setup ProFlow (F4).
4. Select Load Cassette (F4). The message ‘Has the ProFlow unit’s base
cover been removed?’ is displayed.
5. If the ProFlow unit’s base cover is still fitted continue with Step 6. If the
ProFlow unit’s base cover has been removed go to Step 12.
=
Run
Open
Cover
Paste
Load
Clean
Screen
Setup Monitor Maint.
Mode
Load
Data
Edit
Data
Setup
ProFlow
Change
Screen
Change
Tooling
Change
Language
Exit
Change
ProFlow
Load
Cassette
Exit
semi automatic
&21680$%/(5(3/(1,6+0(176
352)/2:
Software Version 07SP02 User Manual 8.55
6. Select Remove Cover (F8). The message ‘Open the printer cover and
remove the ProFlow unit’s base cover’ is displayed.
7. Raise the printhead cover.
8. Remove the ProFlow unit’s base cover.
9. Lower the printhead cover.
10. Press the System button.
11. Select Exit (F8).
12. Select Yes (F1). The message ‘The ProFlow unit will be placed in the
REAR envelope’ is displayed.
13. If the ProFlow unit is required to be placed in another envelope continue with
Step 14. If the ProFlow unit is required to be placed in the machine preferred
envelope go to Step 18.
14. Select, Select Another (F8).
The following window is displayed:
15. Use the Next or Previous keys (F4 or F5) to highlight Front.
16. Select Use (F1).
Yes
Remove
Cover
Exit
Yes
Remove
Cover
Proceed
Select
Another
Preferred Envelope
REAR
FRONT
Use Next Previous Exit
Use Next Previous Exit
semi automatic
&21680$%/(5(3/(1,6+0(176
352)/2:
8.56 User Manual Software Version 07SP02
17. Select Exit (F8).
18. Select Proceed (F1). The ProFlow unit is placed in contact with the stencil.
19. Raise the printhead cover.
20. Ensure that the ProFlow pressure mechanism is in the raised position (to
expose transfer head diaphragm).
21. Remove the centre filling port bayonet cap.
22. Using either a general purpose mastic gun or the optional ProFlow pneu-
matic recharging gun. Load a standard cartridge and fit the short recharging
nozzle to the cartridge, (figure below refers).
NOTE
To ensure that any air within the cartridge and nozzle is expelled prior to
using the gun, charge the gun so that paste is starting to exude from the
nozzle.
Use Next Previous Exit
Proceed
Select
Another
Filling Port
Bayonet Cap
Diaphragm
Diaphragm Retainer
Recharging Nozzles
Filling Port
Bayonet Cap
Filling Port
Bayonet Cap
Transfer Head (Showing Diaphragm)