182050 User manual - 第32页
semi automatic 0$&+,1( 352*5$ 00,1* 67$*(% 9$ &8807 22/,1* 1.22 User Manual Software Ve rsion 07SP02 16. Select Generic T ooling (F7) . The print carri age moves to the front of the machine. The following …
semi automatic
0$&+,1(352*5$00,1*
67$*(%9$&880722/,1*
Software Version 07SP02 User Manual 1.21
7. Select Save (F2). The message ‘Saving fiducial data - Please wait Board
data file saved’ is displayed.
8. Select Exit (F8).
9. Select Full Width (F5). The message ‘Checking for a board on the belts’
is displayed. Whilst the rear rail is moving the message ‘Rail Moving...’ is
displayed.
10. Select Open Cover (F2).
11. Raise the printhead cover.
12. The vacuum box can now be fitted into the appropriate location holes in the
tooling plate. Ensure the vacuum box is placed into the correct set of holes
taking regard of the type of screen being used. Connect the vacuum hose
to the vacuum box inlet, ensure the hose is routed clear of any parts.
13. Lower the printhead cover.
14. Press the System button.
15. Select Board Width (F5). The message ‘Checking for a board on the
belts’ is displayed. Whilst the rear rail is moving the message ‘Rail
Moving...’ is displayed.
Save Next Previous Incr. Decr. Exit
Save Next Previous Incr. Decr. Exit
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Generic
Tooling
Exit
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Generic
Tooling
Exit
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Generic
Tooling
Exit
semi automatic
0$&+,1(352*5$00,1*
67$*(%9$&880722/,1*
1.22 User Manual Software Version 07SP02
16. Select Generic Tooling (F7). The print carriage moves to the front of the
machine.
The following window and menu bar is displayed:
NOTE
If contaminated squeegees are fitted, these should be replaced at this point.
17. Select Continue (F1). Cleaner moves to the Home position and the print
carriage moves to the rear of the machine. The message ‘Table at Home
Height’ is displayed.
18. Select Transprt Height (F3). The message ‘Table at Transport Height’ is
displayed.
19. Place a board on the input sensor of the transport rail of the machine.
20. Select Load (F1).
21. Select Auto Board (F1).
22. Select Vision Height (F3). The message ‘Table at Vision Height. Check
Tooling Clearance’ is displayed.
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Generic
Tooling
Exit
Generic Tooling Warning
WARNING Paste may drip into the machine
Remove Squeegees NOW
Continue
Open
Cover
Exit
Continue
Open
Cover
Exit
Load
Transpr t
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Load
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
Auto
Board
Manual
Board
Exit
Unload
Vision
Height
Home
Height
Board
Clamps
Change
Screen
Open
Cover
Exit
semi automatic
0$&+,1(352*5$00,1*
67$*(%9$&880722/,1*
Software Version 07SP02 User Manual 1.23
23. Select Contact Height (F3).
The following window and menu bar is displayed:
24. Select Continue (F1). The message ‘Table at Contact Height. Check
Tooling Clearance’ is displayed.
25. Select Open Cover (F7).
26. Raise the printhead cover.
27. Check that the setup of the tooling is adequate for the board, adjust as
necessary.
NOTE
If adjustment is required, this can be carried out at Transport Height.
28. Lower the printhead cover.
29. Press the System button.
30. Select Exit (F8).
Contact
Height
Transprt
Height
Change
Screen
Open
Cover
Exit
Contact Height Warning
WARNING Check for obstructions between
the Rails and the Screen
Continue
Open
Cover
Exit
Continue
Open
Cover
Exit
Vision
Height
Open
Cover
Exit
Exit