182050 User manual - 第86页
semi automatic 0$&+,1( 352*5$ 00,1* 0(183$5$ 0(7(5 6 1.76 User Manual Software Ve rsion 07SP02 Board Thickness This par ameter is used by the machine to set corr ect vision and print height s. Front Print S peed Th…
semi automatic
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 07SP02 User Manual 1.75
Print Area Length This is the maximum printable distance in the Y direction, ie the maximum
distance the squeegee can travel, front to back.
NOTE
This parameter field only appears if Custom Screen has been selected.
Print Area Width This is the maximum length of squeegee that could be fitted to the printer, taking
into account stencil frame and the amount of mesh surrounding the mask. This
is also the maximum length of paste that can be dispensed.
NOTE
This parameter field only appears if Custom Screen has been selected.
Board Width This parameter sets the rail width for this particular product. It is also used to
set a default value for the print stroke, the clean screen and the board stop
position in the Y direction. The maximum value depends on the stencil type
selected.
Board Length This parameter is used to set the default values for the board stop position in
the X direction, and the paste dispensing area. The maximum value depends
on the type of stencil selected.
Minimum Maximum Increment
100.0mm 508.5mm 0.1mm
Minimum Maximum Increment
100.0mm 510.0mm 0.1mm
Minimum Maximum Increment
40.0mm 265 508.0mm 0.1mm
255 432.0mm
249 330.0mm
Fuji 460.0mm
Sanyo 284.0mm
Heraeus 344.0mm
Minimum Maximum Increment
50.0mm 265 510.0mm 0.1mm
255 460.0mm
249 430.0mm
Fuji 460.0mm
Sanyo 420.0mm
Heraeus 344.0mm
semi automatic
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.76 User Manual Software Version 07SP02
Board Thickness This parameter is used by the machine to set correct vision and print heights.
Front Print Speed This parameter sets the speed across the stencil when printing.
Rear Print Speed This parameter sets the speed across the stencil when printing.
Flood Speed This Parameter sets the flood blade speed across the stencil when performing
a flood stroke.
Print Front Limit This determines the distance from the front edge of the board that printing must
start.
NOTE
With ProFlow fitted the minimum value is 0mm.
Print Rear Limit This determines the distance from the rear edge of the board that printing must
start.
NOTE
With ProFlow fitted the minimum value is 0mm.
Front Pressure This parameter sets the force applied by the front squeegee during its print
stroke.
Minimum Maximum Increment
0.20mm 6.00mm 0.1mm
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec
Minimum Maximum Increment Default
2.0mm/sec 150.0mm/sec 1.0mm/sec 10.0mm/sec
Minimum Maximum Increment
10.0mm/sec 150.0mm/sec 1.0mm/sec
Minimum Maximum Increment Default
-6.5mm Board Width - print rear limit 0.1mm 0.0mm
Minimum Maximum Increment Default
-6.5mm Board Width - print front limit 0.1mm 0.0mm
Minimum Maximum Increment
0.0Kg 20.0Kg 0.2Kg
semi automatic
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 07SP02 User Manual 1.77
Rear Pressure This parameter sets the force applied by the rear squeegee during its print
stroke.
Flood Height This parameter sets the height of the flood blade above the stencil during a flood
stroke.
ProFlow Knead
Pressure
This parameter sets the pressure to be applied, while using ProFlow, when
kneading in either direction.
Knead Off-image This parameter sets whether ProFlow is to knead in an off-image area of the
stencil. Options are:
Knead Before
Printing
This parameter sets ProFlow to knead before printing the first board and the
amount of boards to be printed between kneading.
NOTE
This parameter is only displayed if Knead Off-image is set to enabled.
Stencil Protection This parameter sets whether tooling to support the stencil, outside the board
and clamp envelopes, is in use. Options are:
NOTE
This parameter is only displayed while ProFlow is fitted.
Minimum Maximum Increment
0.0Kg 20.0Kg 0.2Kg
Minimum Maximum Increment
0.0mm 5.0mm 0.02mm
Minimum Maximum Increment Default
0.0Kg 20.0Kg 0.2Kg 10.0Kg
Options Available Default
Enabled Enabled
Disabled
Minimum Maximum Increment Default
0
(Disables knead before printing)
100 1 0
Options Available Default
On On
Off