182050 User manual - 第97页

semi automatic 0$&+,1 (352*5 $00,1 * 0(18 3$5$ 0(7 (56 Software Version 07SP02 User Manual 1.87 Reverse Y Offset Programmabl e offset of the print on the board when printing from the fr ont. A positive of fset move…

100%1 / 266
semi automatic
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.86 User Manual Software Version 07SP02
Fiducial 1 Y
Coordinate
Distance of first fiducial from the front edge of the board.
NOTE
Refer to Fiducial 1 X Coordinate warning window information.
Fiducial 2 X
Coordinate
Distance of second fiducial from the right or left hand edge of the board
(configuration dependent).
NOTE
Refer to Fiducial 1 X Coordinate warning window information.
Fiducial 2 Y
Coordinate
Distance of the second fiducial from the front edge of the board.
NOTE
Refer to Fiducial 1 X Coordinate warning window information.
Forward X Offset Programmable offset of the print on the board when printing from the rear.
A positive offset moves the print to the right of the board.
Forward Y Offset Programmable offset of the print on the board when printing from the rear.
A positive offset moves the print to the rear of the board.
Forward Theta
Offset
Programmable offset of the print on the board when printing from the rear.
A positive offset moves the print in a clockwise direction.
Reverse X Offset Programmable offset of the print on the board when printing from the front.
A positive offset moves the print to the right of the board.
Minimum Maximum Increment Default
1.0mm Board Width 0.1mm 1.0mm
Minimum Maximum Increment Default
1.0mm Board Length 0.1mm 1.0mm
Minimum Maximum Increment Default
1.0mm Board Width 0.1mm 1.0mm
Minimum Maximum Increment
-1.0mm +1.0mm 0.004mm
Minimum Maximum Increment
-1.0mm +1.0mm 0.004mm
Minimum Maximum Increment
-1000 arc seconds +1000 arc seconds 2 arc seconds
Minimum Maximum Increment
-1.0mm +1.0mm 0.004mm
semi automatic
0$&+,1(352*5$00,1*
0(183$5$0(7(56
Software Version 07SP02 User Manual 1.87
Reverse Y Offset Programmable offset of the print on the board when printing from the front.
A positive offset moves the print to the rear of the board.
Reverse Theta
Offset
Programmable offset of the print on the board when printing from the front.
A positive offset moves the print in a clockwise direction.
Screen X Forward Nominal position of the X front screen actuator which ensures that correspond-
ing stencil and board fiducials can be viewed from a single camera position.
Screen X Rear Nominal position of the X rear screen actuator which ensures that correspond-
ing stencil and board fiducials can be viewed from a single camera position.
Screen Y Axis Nominal position of the Y screen actuator which ensures that corresponding
stencil and board fiducials can be viewed from a single camera position.
Tooling Type This determines which type of board support is to be used with this particular
product. Options are:
Flatten Vacuum
Delay
This parameter determines the duration of vacuum applied whilst the board is
pressed against the underside of the screen with Vac for Flex enabled.
Minimum Maximum Increment
-1.0mm +1.0mm 0.004mm
Minimum Maximum Increment
-1000 arc seconds +1000 arc seconds 2 arc seconds
Minimum Maximum Increment
-20.0mm +20.0mm 0.004mm
Minimum Maximum Increment
-20.0mm +20.0mm 0.004mm
Minimum Maximum Increment
-10.0mm +10.0mm 0.004mm
Options
Magnetic
Vacuum
Vac for Flex
Minimum Maximum Increment Default
0 sec 5 secs 0.1 sec 2 secs
semi automatic
0$&+,1(352*5$00,1*
0(183$5$0(7(56
1.88 User Manual Software Version 07SP02
Separation
Vacuum Delay
This parameter determines the duration of vacuum applied after printing and
before the rising table is lowered to separation height with Vac for Flex enabled.
Tooling Deviation This parameter sets the extent of tooling deviation before a warning message
is posted.
Board Stop X This parameter determines the distance from the centre line of the machine to
the board stop position.
Board Stop Y This parameter determines the distance from the fixed rail to the board stop
position.
Paste Start This parameter determines start position of the paste dispense measured from
the centre line of the machine. The limits depend on the type of stencil fitted.
Minimum Maximum Increment Default
0 sec 5 secs 0.1 sec 2 secs
Minimum Maximum Increment Default
0% 50% 0.25% 20%
Minimum Maximum Increment Default
0.0mm 255.0mm 0.1mm Half of the board
length set in the board
file, (board located
centrally)
Minimum Maximum Increment Default
20.0mm Board width minus
15.0mm
0.1mm Two thirds of the
board width
Minimum Maximum
Adapter Start Position Adapter Start Position
No Adapter -255.0mm No Adapter +255.0mm
255 -230.0mm 255 +230.0mm
Sanyo -210.0mm Sanyo +210.0mm
Heraeus -172.0mm Heraeus +172.0mm
249 -215.0mm 249 +215.0mm
Default - half the board length Default + half the board length