YSM20R_YSM20WR_Mainte_E
Maintenance Manual YAMAHA SMT Assembly System Surface Mounter YSM20R T ypePV , T ypeSV EMKMK-209-0310 YSM20WR
w
Be sure to read these safety instructions before using YAMAHA surface mounters or related products.
Safety instructions
SFSMT-EN-181-0100
Safety instructions
Contents
CE marking i
1. Warning labels ii
1.1 Warning label format and mark description ii
1.1.1 Warning label format ii
1.1.2 Mark description iii
2. Label positions iv
3. Safety xiv
3.1 To ensure safety xiv
3.1.1 Defining safety xiv
3.1.2 Causes of injuries and accidents xiv
3.2 Using safety gear xiv
3.3 Restrictions on machine use xv
3.3.1 Defining the operator and service personnel xv
3.3.2 Restricting machine operation with passwords xv
3.3.3 Lock out the main switch and the air supply/exhaust switch xv
3.4 Cautions during machine operation xvi
3.5 Cautions during power outages xvi
3.6 Cautions regarding ferromagnetic fields xvi
3.7 Handling the internal tape cutter xvi
3.8 Keeping hands away from moving parts xvii
3.9 Handling solvents (including solder, adhesive and flux) xix
3.10 Handling the laser xix
3.11 Handling grease and oil xx
3.12 Handling batteries xx
3.13 Handling heavy objects xx
4. Safety message in this manual xxi
i
Safety instructions
CE marking
This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC
Directive 2014/30/EU (description A2 below).
However, this equipment does not bear CE marking if a custom order item was installed.
A1.
Cautions regarding the official language of EU countries and the language used in operation
manuals, CE declarations, operation screen characters, and warning labels when this equipment is
installed in an EU country.
• All materials except warning labels are written in English only.
n
NOTE
Warning labels only have pictograms or else include warning messages in English, Chinese, Korean and Japanese
language.
A2.
EMC description
• Electromagnetic immunity (Immunity)
Complies with test standards as specified by EN 61000-6-2.
• Electromagnetic emissions (Emission)
Complies with test standards for ISM category: Group 1, Class A, as specified by EN 55011.
n
NOTE
Class A equipment is intended for use in industrial environments. If used in other environments, ensuring
electromagnetic compatibility (EMC) might be difficult. Refer to EN 55011 standards for detailed information.