YSM20R_YSM20WR_Mainte_E - 第155页
5-13 5 Lubrication points 2.5.2 FM head unit Ball screw Guide Spline shaft FM head unit lubrication points Grease gun: Manual lubrication: 53508-KMK-00 Lubrication section Grease Lubrication point Interval Procedure Ball…
5-12
5
Lubrication points
2.5 Head unit
2.5.1 HM head unit
n
NOTE
Basically, it is not necessary to apply grease to spline shaft (Z-axis) of HM head unit. However, if touching the shaft
surface or solvent sprayed on it, the grease is removed and shaft gets rusted easily. Apply specified grease (NSL)
slightly for anti-rust as needed.
HM unit lubrication point
Spline shaft
Grease gun:
Manual lubrication:
53507-KMK-00
Lubrication section Grease
Lubrication
point
Interval Procedure
Spline shaft NSL 10/head
When
required
Manual lubrication
(Apply slightly.)
5-13
5
Lubrication points
2.5.2 FM head unit
Ball screw
Guide
Spline shaft
FM head unit lubrication points
Grease gun:
Manual lubrication:
53508-KMK-00
Lubrication section Grease
Lubrication
point
Interval Procedure
Ball screw NSL 5/head 3-month Manual lubrication
Spline shaft LRL 5/head 3-month Manual lubrication
Guide AFF 5/head 3-month Manual lubrication
Chapter 6 How to replace consumable parts
Contents
1. Nozzle 6-1
1.1 Replacing nozzle tip and spring 6-1
1.2 Replacing nozzle O-ring 6-2
2. Nozzle leaf springs and roller lock 6-3
2.1 Replacing nozzle leaf springs 6-3
2.1.1 HM head 6-3
2.1.2 FM head 6-5
2.2 FM head: Replacing roller lock 6-6
3. Head unit 6-7
3.1 HM head: Replacing valves 6-7
3.2 FM head: Replacing valves 6-9
4. Conveyor 6-10
4.1 Replacing conveyor belt 6-10
4.2 Replacing conveyor valve 6-20
5. Base 6-25
5.1 Replacing carriage clamp valve 6-25