YSM20R_YSM20WR_Mainte_E - 第48页
1-15 1 Maintenance n Precautions when handling grease w W ARNING INFLAMMA TION MA Y OCCUR IF GREASE OR LUBRICANT GETS INTO THE EYES. BEFORE HANDLING THE GREASE OR LUBRICANT, WEAR SAFETY GOGGLES TO ENSURE THE GREASE OR LU…
1-14
1
Maintenance
2.3.2 Lubricating tools and grease
Lubricating tools and grease
Parts supplied with machine / Optional Parts
Lithium-based grease NSL
Oil syringe for nozzle holder
Grease gun
Standard nozzle
Flexible type nozzle
Bent type nozzle
GREASE GUN SET
53108-KMK-00
n
Lubricating tools and grease (Parts supplied with machine)
Name Part name Part No. Note
Oil syringe for nozzle holder SYRING, OIL KV8-M8870-00X Turbine oil VG32
Lithium-based grease GREASE PACK K48-M3856-00X NSL 80
g
n
Lubricating tools and grease (Optional parts)
Name Part name Part No. Note
Grease gun (with standard nozzle) GREASE GUN K48-M3852-00X
GREASE GUN SET
KHW-M3852-A0X
Nozzle (flexible type) GREASE NOZZLE K48-M3857-00X
Nozzle (bent type) GREASE NOZZLE K48-M3854-00X
AFF grease GREASE PACK(THK) KJX-M3801-00X For FM head Z-axis guide
LRL grease
(Previous item: AFB grease)
GREASE PACK K48-M3851-10X
For FM head Z-axis
Spline shaft LRL 50 g
c
CAUTION
The parts (Part Nos.) in this manual are at the time of issuing this manual. The Part Nos. may be changed without prior
notice. Make sure to verify the latest Part Nos. before ordering.
1-15
1
Maintenance
n
Precautions when handling grease
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT GETS INTO THE EYES. BEFORE HANDLING THE GREASE OR
LUBRICANT, WEAR SAFETY GOGGLES TO ENSURE THE GREASE OR LUBRICANT DOES NOT GET INTO THE EYES.
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT COMES INTO CONTACT WITH SKIN. BE SURE TO WEAR PROTECTIVE
GLOVES TO PREVENT CONTACT WITH SKIN.
w
WARNING
DO NOT TAKE ORALLY OR EAT GREASE OR LUBRICANT. EATING WILL CAUSE DIARRHEA AND VOMITING.
c
CAUTION
After use, tightly cap the grease tube to ensure dust, debris and moisture do not enter inside. Store the grease in a
dark location not exposed to direct sunlight and keep it away from fire and heating sources.
1-16
1
Maintenance
2.3.3 Special tool
n
Special tool (Optional purchase parts)
Special tool
Optional purchase parts
HM head leaf spring positioning tool
ANC nozzle attaching/detaching tool
Nozzles are not attached
Nozzles are attached (facing down)
30x, 31x series nozzles
53109-KMK-00
Name Part name Part No. Note
Leaf spring installation tool TOOL, LEAF SPRING KGS-M8810-00X
See "2.1 Replacing nozzle leaf
springs" in chapter 6 for how to use
the tool.
ANC nozzle attaching/detaching
tool
NOZZLE TOOL ANC KLW-M88M0-00X
See "1.2 Nozzle cleaning" in
chapter 3 for how to use the tool.
n
NOTE
Use of the leaf spring positioning tool makes it possible to attach the leaf springs more uniformly. When this tool is
provided, attach the leaf springs with this tool.
n
NOTE
ANC nozzle attaching/detaching tool can attach/detach up to 10 nozzles at the nozzle station (option) at once. 30x
series and 31x series nozzles are available.
c
CAUTION
The parts (Part Nos.) in this manual are at the time of issuing this manual. The Part Nos. may be changed without prior
notice. Make sure to verify the latest Part Nos. before ordering.
n
NOTE
The leaf spring positioning tool is dedicated for the HM head of YSM20R/YSM20WR. However, this tool is also available
for other YAMAHA machines.