YSM20R_YSM20WR_Mainte_E - 第50页
1-17 1 Maintenance 2.4 Required tools Prepare the following tools and items necessary for maintenance. n T ool list : Supplied with machine, : Options Name Description Phillips screwdriver Large, small Flat-head screwdri…
1-16
1
Maintenance
2.3.3 Special tool
n
Special tool (Optional purchase parts)
Special tool
Optional purchase parts
HM head leaf spring positioning tool
ANC nozzle attaching/detaching tool
Nozzles are not attached
Nozzles are attached (facing down)
30x, 31x series nozzles
53109-KMK-00
Name Part name Part No. Note
Leaf spring installation tool TOOL, LEAF SPRING KGS-M8810-00X
See "2.1 Replacing nozzle leaf
springs" in chapter 6 for how to use
the tool.
ANC nozzle attaching/detaching
tool
NOZZLE TOOL ANC KLW-M88M0-00X
See "1.2 Nozzle cleaning" in
chapter 3 for how to use the tool.
n
NOTE
Use of the leaf spring positioning tool makes it possible to attach the leaf springs more uniformly. When this tool is
provided, attach the leaf springs with this tool.
n
NOTE
ANC nozzle attaching/detaching tool can attach/detach up to 10 nozzles at the nozzle station (option) at once. 30x
series and 31x series nozzles are available.
c
CAUTION
The parts (Part Nos.) in this manual are at the time of issuing this manual. The Part Nos. may be changed without prior
notice. Make sure to verify the latest Part Nos. before ordering.
n
NOTE
The leaf spring positioning tool is dedicated for the HM head of YSM20R/YSM20WR. However, this tool is also available
for other YAMAHA machines.
1-17
1
Maintenance
2.4 Required tools
Prepare the following tools and items necessary for maintenance.
n
Tool list
: Supplied with machine, : Options
Name Description
Phillips screwdriver Large, small
Flat-head screwdriver Large, small
Phillips precision screwdriver #0, #1 (Used to replace nozzle leaf springs and air valves.)
Flat-head precision screwdriver Used to remove O-ring or replace circlip.
Hex wrench set 1 set
Cutting pliers Used to cut cable ties when cleaning inside of side-view camera.
Precision wrench Used to maintain spline shaft.
Grease gun Used to apply grease.
Air blow tool Used for cleaning.
Ultrasonic cleaner Used to clean nozzles.
Oil syringe for nozzle holder Used to apply turbine oil (VG32).
Nozzle cleaning wire Used to clean nozzle holes.
Vacuum assembly Used to clean feeder plate surface, etc.
Plastic spatula and brush Used to clean belt guide and pulley.
n
Other tool list
: Supplied with machine, : Options
Name Description
Cloth Use lint-free cloth that does not leave dust or residue.
Square cloth Used to prevent parts from being lost or contaminated. (2 sheets)
Cleaning alcohol Use absolute ethanol.
Paper cup or tray Used to clean inside of spline shaft.
Cable ties (100 mm, 250 mm) Used to clean inside of side-view camera.
Cotton swab (15 cm) Used to clean the camera prism, lighting unit, etc.
Lens cleaner Used to clean camera lighting unit.
Blower brush Used to clean camera lighting unit.
Cleaning kit Used to clean spline shaft.
Leaf spring positioning tool for HM head Used to attach the leaf springs of the HM head.
ANC nozzle attaching/detaching tool Up to 10 nozzles at the nozzle station can be attached/detached at once.
n
Safety goggles and mask
Name Description
Dust-proof goggles
Always wear these goggles and mask when using alcohol, such as
absolute ethanol or an air blow.
Dust-proof mask
Protective gloves Use when applying lubricant as needed.
