YSM20R_YSM20WR_Mainte_E - 第68页
3-7 3 Periodic maintenance items 1.2.4 ANC nozzle attaching / detaching tool Regarding the machine equipped with a nozzle station (option / hereafter "ANC"), nozzles are detac hed manually from the nozzle stati…
3-6
3
Periodic maintenance items
5
Clean the nozzle tip.
Push the nozzle tip vertically against the
adhesive surface of the nozzle tip cleaning
tape several times to remove dirt.
c
CAUTION
If turning or tilting a nozzle while pushing it against the
tape, the adhesive surface may stick to the nozzle.
6
Lubricate the slide section.
Lubricate the slide section referring to "1.2.1
Cleaning and lubricating nozzle slide
section" in this chapter.
7
Return removed nozzles to head.
n
NOTE
If removed nozzles from the nozzle station (option),
return them to the original storage positions.
Nozzle tip cleaning tape
Step 5
Nozzle tip cleaning tape
Adhesive surface
Push nozzle vertically.
53309-KMK-00
3-7
3
Periodic maintenance items
1.2.4 ANC nozzle attaching / detaching tool
Regarding the machine equipped with a nozzle station (option / hereafter "ANC"), nozzles are detached
manually from the nozzle station for maintenance. In this case, if using the "ANC nozzle attaching/detaching
tool" (hereafter "tool"), up to 10 nozzles can be attached/detached at once.
Nozzles are not attached Nozzles are attached (use it facing down)
ANC nozzle attaching/detaching tool
Tool tip protecting cap
ANC nozzle attaching/detaching tool
30x, 31x series nozzles
53310-KMK-00
n
Available nozzles
30x series nozzles (301A, 303A nozzles, etc.) and 31x series nozzles (311A, 312A nozzles, etc.)
n
NOTE
The "Tool tip protecting cap" is attached on the tip of the tool when shipping the tool. Make sure to attach the cap
except when the tool is used for protection.
3-8
3
Periodic maintenance items
n
How to use ANC nozzle attaching/detaching tool (detaching nozzles)
1
Open the nozzle station shutter.
Open the [Unit] - [Head] screen and press
the [Nozzle. Stn Shutter] button to open the
nozzle station shutter.
2
Set the tool on the nozzle station.
1. Press the emergency stop button and
then open the machine safety cover.
2. Set the tool vertically on the nozzles at
the nozzle station aligning the position of
nozzles to be detached.
3. Check that the tool is set to nozzles
securely.
3
Raise the tool up.
Raise the tool up vertically and slowly.
n
NOTE
Raise the tool up vertically and slowly to avoid the
nozzle tip from hitting the shutter, etc.
c
CAUTION
If raising the tool up fast and forcibly, nozzles or the
nozzle station may be damaged.
4
Close the nozzle station shutter.
Press the [Nozzle. Stn Shutter] button again
and close the nozzle station shutter.
Nozzle station - Opening the shutter
Step1
54300-KMK-00
Setting the tool
Step 2
Set the tool vertically aligning
nozzles to be detached.
Check that the tool is set to
nozzles securely.
53311-KMK-00
Raising the tool up
Step 3
Raise the tool up vertically to avoid the
nozzle tip from hitting the shutter.
53312-KMK-00