YSM20R_YSM20WR_Mainte_E - 第9页
vii Safety instructions Injury from touching moving parts during machine operation Death, serious injury or equipment malfunction Do not touch or tamper with safety cover switches and do not operate machine if any safety…
vi
Safety instructions
n
Label positions
Warning/caution labels
Rear
n Open/close cover
(front and rear sides)
n Open/close cover
(front and rear sides)
n Feeder setup section
(front and rear sides)
n Cutter section
n Conveyor opening
(front and rear sides,
right and left sides)
n Open/close cover inner side
(front and rear sides)
n Open/close cover inner side
(front and rear sides)
n Panel
93012-KMK-00
vii
Safety instructions
Injury from touching moving parts during machine operation Death, serious injury or equipment malfunction
Do not touch or tamper with safety cover switches and do not
operate machine if any safety cover switches were deactivated.
Observe precautions necessary due to strong magnetic fields.
· Hands or fingers might be caught between moving parts
and covers, causing injury.
· Hands or fingers might be pinched by moving parts,
causing injury.
Electrical shock hazard
Never place hands or fingers in machine during operation
such as when handling tray magazines.
Do not touch power supply inside cover.
Injury from tape cutter
The carrier tape could make contact with the head,
possibly causing machine damage.
Do not put hands into cutter unit while power or air is
supplied.
When a feeder is extracted from its loaded position, be sure
that the feeder has been completely extracted before pressing
it back into its loaded position.
Machine damage
Do not insert or remove any connector while power is on.
viii
Safety instructions
n
Label positions
Warning/caution labels
Interior
■ X-axis frame
■ Y-axis linear scale
1. Never touch.
1
2
3
2. Disassembly prohibited.
3. Caution on strong
magnetic fields
1
3
2
1
3
2
Linear cover
Linear motor
93013-KMK-00