00197498-03_UM_SiplaceCA-Serie_EN - 第157页

User Manual SIPLACE CA-Series 3 Technical Data From software version SC.708.0 Edition 12/20 14 EN -DRAFT 3.7 Placement Heads 157 3.7.2.4 Placement Modes for MultiSt ar The CPP head functions with dif ferent placement m o…

100%1 / 518
3 Technical Data User Manual SIPLACE CA-Series
3.7 Placement Heads From software version SC.708.0 Edition 12/2014 EN -DRAFT
156
Observe the following rules when defining the assembly position:
The head height must be the same for all heads in the same placement area.
Always install the CPP head in the top assembly position if it is to be combined with the fol-
lowing assemblies:
– Stationary component camera
– Matrix tray changer
– TwinStar
3.7.2.3 Classification of Component Range to be Processed
3
Component
class
Component
size
Assembly
position
*a
of CPP
head
Component
height
Component
camera type
Small compo-
nent
K_BE
01005 -
27 x 27 mm²
Top Up to 8.5 mm
Head camera,
type 30
Bottom Up to 6 mm
01005 -
16 x 16 mm²
Bottom Up to 6 mm
Head camera,
type 38
Medium sized
component, type
M_BE_1
< 27 x 27 mm²
Top
Between 8.5 and
11.5 mm
Stationary
component cam-
era,
type 33
(see section 6.7.1
,
page 410
)
Bottom Not possible
Medium sized
component, type
M_BE_2
Between
27 x 27 mm²
and 32 x 32 mm²
Top 11.5 mm
Bottom Not possible
Large compo-
nent
G_BE
Between 32
x 32 mm² and
50 x 40 mm²
Top Up to 11.5 mm Stationary compo-
nent camera,
type 33
Bottom Not possible
Tab. 3.7 - 1 Classification of component range to be processed
*)a Please observe the rules for assembly position heights in section 3.7.2.2
, page 155.
User Manual SIPLACE CA-Series 3 Technical Data
From software version SC.708.0 Edition 12/2014 EN -DRAFT 3.7 Placement Heads
157
3.7.2.4 Placement Modes for MultiStar
The CPP head functions with different placement modes, which vary according to the component
class. The setup optimization selects the placement mode with the shortest cycle times. The fol-
lowing table shows the correlation between component class and placement mode.
Tab. 3.7 - 2 Relations between component class and placement modes
3
3
3.7.2.5 Assembly Positions of MultiStar in the Machine
Placement mode Component class
Small component Medium sized
component
Large component
Collect&Place mode Yes No No
Mixed mode Yes Yes No
Advanced
Pick&Place mode
Yes Yes Yes
Pick&Place mode
only
No No Yes
Placement machine Assembly
position
*a
CPP head
Maximum component
height
Vision camera
SIPLACE CA Bottom 6 mm Head camera
Top 8.5 mm Head camera
Top only 11.5 mm
Stationary component
camera
Tab. 3.7 - 3 Assembly positions of CPP head in the machine
*)a Please observe the rules for assembly position heights in section 3.7.2.2
, page 155.
3 Technical Data User Manual SIPLACE CA-Series
3.7 Placement Heads From software version SC.708.0 Edition 12/2014 EN -DRAFT
158
3.7.2.6 MultiStar in Collect&Place Mode
The MultiStar does not process components in this mode.
3
Fig. 3.7 - 7 MultiStar - Collect&Place mode
K_BE Small component (see table 3.7 - 1, page 156)
Type 30 Component camera, type 30
1 ... 12 Order of components taken up
3
Type 30
K_BE