00197498-03_UM_SiplaceCA-Serie_EN - 第191页
User Manual SIPLACE CA-Series 3 Technical Data From software version SC.708.0 Edition 12/20 14 EN -DRAFT 3.14 Flexible Dual PCB Conveyor 191 3.14.3 Functions The flexible dual conveyor has two co nveyor trac ks that are …
3 Technical Data User Manual SIPLACE CA-Series
3.14 Flexible Dual PCB Conveyor From software version SC.708.0 Edition 12/2014 EN -DRAFT
190
3.14.2 Technical Data
3
Stationary conveyor side Right or left
PCB dimensions
Standard (length x width)
"Long Board with stepping" option
Dual conveyor in "single conveyor" mode
Standard
"Long Board with stepping" option
50 mm x 50 mm to 450 mm x 216 mm
50 mm x 80 mm to 850 mm
*a
x 216 mm
50 mm x 50 mm to 450 mm x 450 mm
50 mm x 80 mm to 850 mm
a
x 450 mm
*)a 850 mm on request
PCB thickness
Standard
0.3 mm to 4.5 mm (± 0.2 mm)
(Standard, thicker on request)
Vacuum accessories on request
Thin boards on carrier
PCB warpage See page 195
PCB weight
*b
*)b Higher weight on request.
Up to 3 kg
Clearance on PCB underside
Standard
Option
25 mm ± 0.2 mm
Max. 40 mm ± 0.2 mm
PCB conveyor height 900 mm ± 15 mm (option)
930 mm ± 15 mm (standard)
950 mm ± 15 mm (SMEMA option)
Type of interface SMEMA / Siemens
Component-free PCB handling edge 3 mm
PCB changeover time < 2.5 s
PCB positioning accuracy ± 0.5 mm
Conveyor mode synchronous or asynchronous
Components on each conveyor same or different
PCB width on each conveyor same or different
Inkspot detection on the PCB synchronous: Possible (no global inkspot)
Asynchronous: possible
Virtual ink spot handler Optional
Automatic width adjustment synchronous: possible
Asynchronous: possible
User Manual SIPLACE CA-Series 3 Technical Data
From software version SC.708.0 Edition 12/2014 EN -DRAFT 3.14 Flexible Dual PCB Conveyor
191
3.14.3 Functions
The flexible dual conveyor has two conveyor tracks that are electrically and mechanically inde-
pendent of one another. The same function as the single conveyor applies (see section 3.13.3
,
page 188
.
3.14.4 "Flexible Dual Conveyor" Features
The "flexible dual conveyor" performance feature allows the conveyor track to be widened beyond
the standard width of 216 mm. Over-wide PCBs can then be processed in a machine with a dual
conveyor. The conveyor sides of the second conveyor track are moved fully together, which de-
activates the conveyor track at the same time.
3
Fig. 3.14 - 2 Flexible dual conveyor in "single conveyor" mode
3
3
Dual conveyor with widened conveyor track 2
(fixed conveyor side on left)
Conveyor track 2
deactivated
Conveyor track 1 Conveyor track 2 Conveyor track 1
deactivated
PCB transport direction PCB transport direction
Fixed conveyor side
Dual conveyor with widened conveyor track 1
(fixed conveyor side on right)
Flexible conveyor side
3 Technical Data User Manual SIPLACE CA-Series
3.14 Flexible Dual PCB Conveyor From software version SC.708.0 Edition 12/2014 EN -DRAFT
192
3.14.5 Definition of Conveyor Lanes
The right-hand conveyor lane (viewed in the direction of transport) is known as "conveyor 1" while
the left conveyor lane is termed "conveyor 2" (see fig. 3.14 - 3
, page 193).
3.14.6 Definition of Conveyor Lane Width
3.14.6.1 Standard Width
The standard width of the conveyor track is the maximum conveyor width defined by the desired
position of the stationary conveyor side. It is no more than 216 mm per track.
3.14.6.2 Over-wide Conveyor Lane
The conveyor track can be widened to 250 mm maximum by moving the stationary conveyor side
out of its normal position.
3.14.6.3 Dual Conveyor in Single Conveyor Mode
The dual conveyor can be configured online to create a single conveyor. One conveyor lane is
moved together completely and is disabled (see fig. 3.14 - 2
, page 191). This gives a conveyor
track width of up to 450 mm.
3.14.7 Transport Modes
The flexible dual conveyor can be used in two modes:
– Synchronous Transport Mode
– Asynchronous transport mode