00197498-03_UM_SiplaceCA-Serie_EN - 第27页
User manual SIPLACE CA-Series 1 Introduction From software version SC.708.0 Edition 12/2014 EN -DRAFT 1.2 Machine Description 27 1.2.6 Non-Prescribed Usage Failure to use the prod uct as prescribed can resu lt in both da…
1 Introduction User manual SIPLACE CA-Series
1.2 Machine Description From software version SC.708.0 Edition 12/2014 EN -DRAFT
26
1.2.4 EC Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE CA4
Item no.: 00519780 1
Manufactured by
ASM GmbH & Co. KG
Rupert-Mayer-Str. 44
D-81379 Munich 1
conforms to the regulations and standards listed in the EC Declaration of Conformity provided.
1.2.5 Correct Usage
The product may only be used for the areas of application specified in the catalogs and technical
descriptions i.e. for the placement of SMD components and bare dies from a wafer and may only
be used together with the third party devices and components recommended or approved by ASM
Assembly Systems GmbH & Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
User manual SIPLACE CA-Series 1 Introduction
From software version SC.708.0 Edition 12/2014 EN -DRAFT 1.2 Machine Description
27
1.2.6 Non-Prescribed Usage
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason any use that is not prescribed is not allowed. In the case of incorrect us-
age, ASM Assembly Systems GmbH & Co. KG will not assume liability for any damage which oc-
curs and will not guarantee the correct and proper function of machine components.
Failure to use the placement machine as prescribed includes, for example
– Operation of the placement machine with safety equipment deactivated or removed.
– Placement of components that do not meet the permitted specifications.
– Use of component feeder modules that have not been approved.
– Use of unauthorized accessories and additional modules.
– Use of the placement machine by unqualified personnel.
– Operation of the placement machine without the hand guard (dummy feeder module) if not
every location is occupied with a feeder module or if a waffle-pack tray holder is used.
– Unclear allocation of electrical connecting cables to each machine and the installed options
(e.g. SWS, MTC etc.).
– If there are two or more people standing at a component trolley location at the same time
during the retrofit.
1.2.7 Noise Emissions
1
1.2.8 Important Notes on Environmentally-Friendly Disposal of Materials
and Components
SIPLACE machines are preferably manufactured using materials and parts that can be easily sep-
arated and disposed of in an environmentally-friendly way.
1
Max. noise emissions 75 dB (A)
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ-
mental protection.
1 Introduction User manual SIPLACE CA-Series
1.2 Machine Description From software version SC.708.0 Edition 12/2014 EN -DRAFT
28
1.2.9 Electromagnetic Compatibility (EMC)
SIPLACE placement machines are designed and tested for professional use in industrial applica-
tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed
in any other environment.
1.2.10 Note on Original SIPLACE Accessories
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys-
tems GmbH&Co.KG.