00197498-03_UM_SiplaceCA-Serie_EN - 第36页
1 Introduction User manual SIPLACE CA-Series 1.7 Abbreviations From software version SC.708.0 Edition 12/2014 EN -DRAFT 36
User manual SIPLACE CA-Series 1 Introduction
From software version SC.708.0 Edition 12/2014 EN -DRAFT 1.7 Abbreviations
35
SC Control computer
SWS SIPLACE Wafer System
TH TwinHead
VS Vision system
WLAN Wireless Local Area Network
1 Introduction User manual SIPLACE CA-Series
1.7 Abbreviations From software version SC.708.0 Edition 12/2014 EN -DRAFT
36
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.1 Safety Instructions
37
2 Operational Safety
2.1 Safety Instructions
2
2.1.1 Conventions for Use of Hazard Symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
2
2
2
DANGER
Observe the safety instructions!
Nonobservance of the safety instructions poses a risk to life, limb and equipment!
Observe the safety instructions in the User Manual of the relevant machine for all
work.
DANGER
Definition
Danger, as used in this user manual, means that death, severe injury or considerable
damage to equipment will occur if the danger instructions are not followed.
WARNING
Definition
Warning, as used in this user manual, means that death, severe injury or considerable
damage to equipment may occur if the warning instructions are not followed.
CAUTION
Definition
Caution, as used in this user manual, means that slight injury or damage to equipment
may occur if the caution instructions are not followed.
PLEASE NOTE
Definition
A note, as used in this user manual, provides information on the product or indicates a
part of the user manual that requires particular attention.