00197498-03_UM_SiplaceCA-Serie_EN - 第459页
User manual SIPLACE CA-Series 8 Station Extensions From software version SC.708.0 Edition 12/20 14 EN -DRAFT 8.1 Nozzle Changers 459 8.1.3 Nozzle Changes for the SI PLACE MultiSt ar and SpeedS tar Item no. 001 19741-xx N…
8 Station Extensions User manual SIPLACE CA-Series
8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT
458
8.1.2.8 "Row 2" Nozzle Changers for the SIPLACE SpeedStar (C&P20 M)
[00119716-xx] Nozzle changer 2, X-Series, C&P20
The "row 2 " nozzle changer can be fitted at the following locations, if no SWS is installed there:
CA4 machine: Locations 1, 2, 3 and 4 (see fig. 8.1 - 4
, page 450)
The retrofit package contains the nozzle changer and an assembly kit.
8
Fig. 8.1 - 9 Assembly kit for the "row 2" nozzle changer
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
459
8.1.3 Nozzle Changes for the SIPLACE MultiStar and SpeedStar
Item no. 00119741-xx Nozzle changer for CPP, X-Series
8
Fig. 8.1 - 10 Nozzle changers for the SIPLACE MultiStar and SpeedStar
(1) Nozzle magazine for 20xx nozzles
(2) Nozzle magazine for 28xx nozzles
8.1.3.1 Description
This nozzle changer can be used both for the CPP head and the C&P20 M head. The magazines
are fitted onto a common carrier pate, are fixed with two cylinder pins and fastened with 4 push
buttons. The exact position is determined with two fiducials on each magazine. The correct seat
of the magazines on the carrier plate is monitored by microswitches, to prevent a collision of the
placement head with any magazines projecting upwards. All 6 magazine locations must be filled
since the safety circuit stops the machine in response to missing magazines or magazines that
are not seated correctly. The nozzle changer also recognizes whether the nozzle magazine is for
20xx nozzles, a 28xx nozzle magazine for the CPP head or a 10xx magazine for the C&P20 M
head, by the nozzle magazine code.
If a SpeedStar is used, no nozzle magazines for the MultiStar may be used.
At the nozzle station, components can be rejected with an air blast from the MultiStar or SpeedStar
nozzles. Both MultiStar and SpeedStar nozzles can be stripped off there and disposed of in the
reject bin.
8 Station Extensions User manual SIPLACE CA-Series
8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT
460
Nozzle magazine for 20xx nozzles 8
8
Fig. 8.1 - 11 Nozzle magazine for 20xx nozzles - locking plate open
(1) 12 garages for 20xx nozzles
(2) Fiducials (only visible when locking plate open)
(3) Locking plate
8
8
8